Vibro-electrical performance of nickel-clustered monocrystalline-silicon photovoltaic cells: A data-informed analytical modal study
Sound & Vibration · 12.11.2026
DOI: 10.59400/sv4833 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sound & Vibration, online erschienen am 12.11.2026. Verfasst von Elyor Saitov und 6 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Dynamic mechanical loading can initiate cracks, interconnect damage, and power loss in crystalline-silicon photovoltaic assemblies, yet the local vibration consequences of metallic impurity clusters inside a cell remain poorly quantified. This study combines previously published electrical and microstructural measurements for nickel-clustered monocrystalline-silicon cells [7] with a reproducible plate-vibration model. The records cover 600-1100 ℃ additional annealing, reported cluster-size intervals of 1-30 µm, open-circuit voltages of 480-506 mV, and short-circuit current densities of 20.2-45.7 mA cm-2. A 10 × 5 × 0.38 mm coupon was represented as a simply supported Kirchhoff-Love plate, with the unreported crystal orientation bracketed by silicon Young's moduli of 130-169 GPa. An independent Mindlin-Reissner eigenvalue calculation, including transverse shear and rotary inertia, predicted a first frequency 1.26% below the Kirchhoff-Love value. Pure-Ni inclusions and Reuss-Voigt stiffness bounds were retained as a conservative homogenization envelope. The Kirchhoff-Love first local bending frequency was 67.05-76.45 kHz. For the 900 ℃ condition with the highest UocJsc proxy calculated from the published data, the proxy was 2.190 times the control value, while the model predicted a first-mode shift of -0.0037% to -0.0040% for the midpoint morphology and -0.0006% to -0.0127% across its stated lower-upper morphology bounds. The maximum predicted reduction over the full feasible morphology domain was 3.051%. These calculations predict a small coupon-level modal effect under the stated geometry, support, and homogenization assumptions; they do not constitute experimental evidence of modal performance, fatigue resistance, or module-level vibration reliability.
Zitieren
APA
Saitov, E., Zikrillaev, N., Umarov, A., Zikrillaev, K., Nasriddinov, S., Makhmudov, K., & Usmanova, N. (2026). Vibro-electrical performance of nickel-clustered monocrystalline-silicon photovoltaic cells: A data-informed analytical modal study. Sound & Vibration. https://doi.org/10.59400/sv4833
Vancouver
Saitov E, Zikrillaev N, Umarov A, Zikrillaev K, Nasriddinov S, Makhmudov K, et al. Vibro-electrical performance of nickel-clustered monocrystalline-silicon photovoltaic cells: A data-informed analytical modal study. Sound & Vibration. 2026. doi:10.59400/sv4833
BibTeX
@article{Saitov2026,
author = {Saitov, Elyor and Zikrillaev, Nurullo and Umarov, Abdusalom and Zikrillaev, Khayrulla and Nasriddinov, Sayfillo and Makhmudov, Khikmat and Usmanova, Nigora},
title = {Vibro-electrical performance of nickel-clustered monocrystalline-silicon photovoltaic cells: A data-informed analytical modal study},
journal = {Sound & Vibration},
year = {2026},
doi = {10.59400/sv4833}
}
EUVIMED