EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of spruce guitar resonance panel structure on acoustic vibration response characteristics

Guanzheng Wan, Jinyi Chen, Yihang Ben, Siyuan Wang, Liang Zhang, Lan He, Yuanji Zhao, Haotian Cui, Zhenbo Liu

Sound & Vibration · 22.07.2026

DOI: 10.59400/sv4345 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sound & Vibration, online erschienen am 22.07.2026. Verfasst von Guanzheng Wan und 8 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, the guitar manufacturing industry has faced a growing shortage of large-diameter, high-quality spruce wood resources. To address this issue, it is urgently necessary to conduct research on the structural design of guitar resonance panels. This study investigates three types of spruce guitar resonance panels with different structures, exciting them at various points, and using a multi-channel FFT analyzer to capture vibration signals and analyze their acoustic vibration response characteristics. The results show that in terms of root mean square (RMS) values indicating overall signal intensity and peak-to-peak values reflecting signal amplitude, the double-spliced resonance panel exhibits the highest vibration energy, followed by the quadruple-spliced resonance panel, while the triple-spliced resonance panel shows the lowest. Regarding spectral centroid and high-frequency energy—indicating richness of high-frequency content—and spectral flatness and kurtosis—reflecting uniformity of energy distribution—the triple-spliced resonance panel demonstrates the brightest tonal quality and the most even spectral energy distribution, followed by the quadruple-spliced panel. From raw material to finished panel, and from double-spliced to quadruple-spliced panels, both elastic modulus and shear modulus show an increasing trend. Compared to the double-spliced panel, multi-spliced panels exhibit higher specific dynamic elastic modulus and acoustic impedance, but lower acoustic radiation quality constant. Although individual parameters vary to some extent, the overall acoustic vibration performance of multi-spliced panels differs little from that of the double-spliced panel. These findings not only provide practical guidance for manufacturers but also offer theoretical support for improving the acoustic quality of guitars.

Zitieren

APA

Wan, G., Chen, J., Ben, Y., Wang, S., Zhang, L., He, L., Zhao, Y., Cui, H., & Liu, Z. (2026). Influence of spruce guitar resonance panel structure on acoustic vibration response characteristics. Sound & Vibration. https://doi.org/10.59400/sv4345

Vancouver

Wan G, Chen J, Ben Y, Wang S, Zhang L, He L, et al. Influence of spruce guitar resonance panel structure on acoustic vibration response characteristics. Sound & Vibration. 2026. doi:10.59400/sv4345

BibTeX
@article{Wan2026,
  author = {Wan, Guanzheng and Chen, Jinyi and Ben, Yihang and Wang, Siyuan and Zhang, Liang and He, Lan and Zhao, Yuanji and Cui, Haotian and Liu, Zhenbo},
  title = {Influence of spruce guitar resonance panel structure on acoustic vibration response characteristics},
  journal = {Sound & Vibration},
  year = {2026},
  doi = {10.59400/sv4345}
}
Kostenlos starten →