EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design optimization and comparative evaluation of oval and toroidal propeller geometries versus a conventional propeller

Rayn Nasr, Majd Shreif, Enrico Abou Jaoude, Celine Ahmar, Jihad Rishmany

Sound & Vibration · 11.03.2026

DOI: 10.59400/sv3889 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sound & Vibration, online erschienen am 11.03.2026. Verfasst von Rayn Nasr und 4 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Drones are increasingly used in delivery, aerial imaging, search and rescue, and agricultural monitoring due to their low cost, low emissions, and ability to reach hazardous or hard-to-access locations. However, a major limitation is the high noise produced by conventional propellers as they interact with the air. Recently, toroidal propellers have emerged as a promising alternative, offering aerodynamic benefits that can reduce noise while maintaining or improving thrust generation. This study investigates the performance of toroidal propellers, both circular and oval, compared to a conventional propeller. The assessment focuses on thrust production, efficiency, and noise emission using both experimental testing and numerical simulations. Results indicate that toroidal propellers provide notable advantages. Experiments showed approximately a 15 dB noise reduction and up to a fourfold increase in thrust relative to the conventional design. Simulations revealed that the oval toroidal propeller achieved the lowest noise level at 29.54 dB, while the circular design produced higher noise but delivered the greatest thrust, reaching 44.08 N. Overall, the study demonstrates that toroidal propellers can significantly enhance drone performance. The optimal choice between oval and circular designs depends on specific mission requirements, balancing noise reduction against thrust demand.

Zitieren

APA

Nasr, R., Shreif, M., Jaoude, E. A., Ahmar, C., & Rishmany, J. (2026). Design optimization and comparative evaluation of oval and toroidal propeller geometries versus a conventional propeller. Sound & Vibration. https://doi.org/10.59400/sv3889

Vancouver

Nasr R, Shreif M, Jaoude EA, Ahmar C, Rishmany J. Design optimization and comparative evaluation of oval and toroidal propeller geometries versus a conventional propeller. Sound & Vibration. 2026. doi:10.59400/sv3889

BibTeX
@article{Nasr2026,
  author = {Nasr, Rayn and Shreif, Majd and Jaoude, Enrico Abou and Ahmar, Celine and Rishmany, Jihad},
  title = {Design optimization and comparative evaluation of oval and toroidal propeller geometries versus a conventional propeller},
  journal = {Sound & Vibration},
  year = {2026},
  doi = {10.59400/sv3889}
}
Kostenlos starten →