EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Realization and optimization of super-junction structures for high-efficiency silicon carbide power devices

Shijing Wang, Mingyu Zhang, Jie Liang, Leyi Tu, Jian Li, Zhiqian Gui, Jiale Zhu, Qian Wu, Deqin He, Haixin Qiu, Zhaoxiang Wang

Materials Technology Reports · 03.06.2026 · 4 (1)

DOI: 10.59400/mtr4128 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Technology Reports, online erschienen am 03.06.2026. Verfasst von Shijing Wang und 10 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, various silicon carbide (SiC) trench and via pattern etching processes are investigated, and high-aspect-ratio super-junction (SJ) structures are successfully fabricated. SiC SJ trenches are promising for ultra-high-voltage power device applications. Using a SiO₂ hard mask, SiC trenches with aspect ratios from 3:1 to 15:1 and depths exceeding 21 μm are prepared. Etch selectivity (SiC/SiO₂) is calculated based on the etched thicknesses of SiC and SiO₂ under the same process, and the selectivity can exceed 10:1 by optimizing hardware configuration and process parameters, especially gas combination and equipment settings. The significant effect of sidewall roughness transfers from the oxide hard mask to the SiC substrate is revealed. A smooth and optimized oxide hard mask sidewall is the key to reducing the final SiC sidewall roughness during pattern transfer. Full-wafer uniformity is improved by multiple tuning methods, including power ratio split, gas ratio split, temperature distribution control, and refined process parameters. Excellent uniformity is achieved: SiC trench critical dimension (CD) variation below 2%, SiC etch depth uniformity below 1%, and sidewall angles above 88° across the entire wafer. Long-term tool stability is verified over 10 consecutive months of etch rate monitoring with standard monitor wafers. The etch rate variation is controlled within 3% and uniformity below 2%, demonstrating reliable mass-production manufacturability of the SiC trench process.

Zitieren

APA

Wang, S., Zhang, M., Liang, J., Tu, L., Li, J., Gui, Z., Zhu, J., Wu, Q., He, D., Qiu, H., & Wang, Z. (2026). Realization and optimization of super-junction structures for high-efficiency silicon carbide power devices. Materials Technology Reports, 4(1). https://doi.org/10.59400/mtr4128

Vancouver

Wang S, Zhang M, Liang J, Tu L, Li J, Gui Z, et al. Realization and optimization of super-junction structures for high-efficiency silicon carbide power devices. Materials Technology Reports. 2026;4(1). doi:10.59400/mtr4128

BibTeX
@article{Wang2026,
  author = {Wang, Shijing and Zhang, Mingyu and Liang, Jie and Tu, Leyi and Li, Jian and Gui, Zhiqian and Zhu, Jiale and Wu, Qian and He, Deqin and Qiu, Haixin and Wang, Zhaoxiang},
  title = {Realization and optimization of super-junction structures for high-efficiency silicon carbide power devices},
  journal = {Materials Technology Reports},
  year = {2026},
  volume = {4},
  number = {1},
  doi = {10.59400/mtr4128}
}
Kostenlos starten →