EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigating the effects of wood ash as an alkaline additive and deflocculant in water-based mud

Abdelaziz Belmahdi, Anas Elhederi

Materials Technology Reports · 08.04.2026 · 4 (1)

DOI: 10.59400/mtr3999 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Technology Reports, online erschienen am 08.04.2026. Verfasst von Abdelaziz Belmahdi und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The environmental impact of chemical additives used in drilling fluids has increased interest in sustainable alternatives. Wood ash, a byproduct of biomass combustion, represents a potential alkaline and rheological modifier for water-based drilling mud systems. This study investigates the performance of wood ash (45–75 μm) at concentrations of 2–8 wt% in bentonite-based water-based mud under both ambient and thermal (hot rolling) conditions. Results demonstrated a clear concentration-dependent response. Plastic viscosity and gel strength decreased progressively up to 6 wt%, indicating improved dispersion and reduced structural buildup. At 8 wt%, partial reversal of this trend was observed, suggesting excessive solids loading may counteract dispersion effects. Yield point values decreased from 6 to 3 lb/100 ft2 as concentration increased, confirming enhanced flowability. Wood ash effectively increased mud pH into the desired operational range (9–11) under ambient conditions, while higher concentrations under thermal aging approached the upper alkaline limit. Mud density remained stable (~8.7 lb/gal) across all concentrations, confirming that wood ash does not adversely affect hydrostatic pressure control. Thermal aging generally reduced rheological parameters due to structural weakening of the bentonite network, although moderate concentrations maintained relatively stable performance. The findings indicate that 4–6 wt% wood ash provides an optimal balance between rheological control and alkalinity enhancement. While promising as a sustainable additive, further investigation is required to evaluate extended filtration performance and compositional variability under field conditions.

Zitieren

APA

Belmahdi, A., & Elhederi, A. (2026). Investigating the effects of wood ash as an alkaline additive and deflocculant in water-based mud. Materials Technology Reports, 4(1). https://doi.org/10.59400/mtr3999

Vancouver

Belmahdi A, Elhederi A. Investigating the effects of wood ash as an alkaline additive and deflocculant in water-based mud. Materials Technology Reports. 2026;4(1). doi:10.59400/mtr3999

BibTeX
@article{Belmahdi2026,
  author = {Belmahdi, Abdelaziz and Elhederi, Anas},
  title = {Investigating the effects of wood ash as an alkaline additive and deflocculant in water-based mud},
  journal = {Materials Technology Reports},
  year = {2026},
  volume = {4},
  number = {1},
  doi = {10.59400/mtr3999}
}
Kostenlos starten →