MULTI-METHOD DIAGNOSIS OF CRANKSHAFT POSITION SENSOR INTERFERENCE IN A THREE-CYLINDER ENGINE FOR AUTOMOTIVE VOCATIONAL TRAINING
EDUCATIONE · 12.08.2026 · 1278-1288
DOI: 10.59397/edu.v4i2.298 ↗Kurz gefasst
Fachartikel in der Zeitschrift EDUCATIONE, online erschienen am 12.08.2026. Verfasst von Arya Vallenra Melupite und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Crankshaft Position (CKP) sensor interference can disrupt crankshaft synchronization and contribute to asymmetric ignition failure in Electronic Control Unit (ECU)-based engine management systems. This study analyzed CKP parameter deviations in a single Daihatsu Xenia 1.0 non-VVT-i vehicle equipped with an EJ-DE three-cylinder engine and examined a low-cost, multi-method diagnostic sequence for workshop and automotive vocational-training contexts. The study was designed as a single-vehicle diagnostic experimental case comparing operational reference specifications, the faulty condition, and the post-repair condition. Data were obtained through OBD-II scanning, cold and hot coil-resistance measurements, reported signal-amplitude and frequency measurements, and CKP air-gap inspection. In the faulty condition, DTCs P0335 and P0336 were recorded, idle speed fluctuated at 650-710 rpm, STFT reached +18-22%, coil resistance increased to 3,180 Ω at 20°C and 3,740 Ω at 80°C, the reported signal amplitude decreased to 0.3-0.5 Vpp, frequency fell to 410 Hz, and the air gap was recorded at 0.58 mm. After sensor replacement and air-gap adjustment to 0.30 mm, the measured parameters returned to the operational reference ranges. These findings corroborate a diagnosis involving concurrent electrical and mechanical abnormalities in this specific vehicle, but the combined repair does not isolate the independent effect of each abnormality. The diagnostic sequence may support evidence-based troubleshooting practice in automotive vocational education; its instructional effectiveness and transferability require further validation.
Zitieren
APA
Melupite, A. V., Pangow, T. T. V., & Rumangit, P. M. (2026). MULTI-METHOD DIAGNOSIS OF CRANKSHAFT POSITION SENSOR INTERFERENCE IN A THREE-CYLINDER ENGINE FOR AUTOMOTIVE VOCATIONAL TRAINING. EDUCATIONE, 1278-1288. https://doi.org/10.59397/edu.v4i2.298
Vancouver
Melupite AV, Pangow TTV, Rumangit PM. MULTI-METHOD DIAGNOSIS OF CRANKSHAFT POSITION SENSOR INTERFERENCE IN A THREE-CYLINDER ENGINE FOR AUTOMOTIVE VOCATIONAL TRAINING. EDUCATIONE. 2026:1278-1288. doi:10.59397/edu.v4i2.298
BibTeX
@article{Melupite2026,
author = {Melupite, Arya Vallenra and Pangow, Tammy Tinny Veissy and Rumangit, Paul Maarthen},
title = {MULTI-METHOD DIAGNOSIS OF CRANKSHAFT POSITION SENSOR INTERFERENCE IN A THREE-CYLINDER ENGINE FOR AUTOMOTIVE VOCATIONAL TRAINING},
journal = {EDUCATIONE},
year = {2026},
pages = {1278--1288},
doi = {10.59397/edu.v4i2.298}
}
EUVIMED