EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of retrogression and reaging heat treatment on calorimetric behavior of EN AW-7049a alloy

Jelena Marinković, Bojana Fidanovski, Ljubica Radović, Igor Radisavljević

Scientific Technical Review · 2025 · 75 (2) · 18-22

DOI: 10.5937/str2600003m ↗

Kurz gefasst

Fachartikel in der Zeitschrift Scientific Technical Review, 2025. Verfasst von Jelena Marinković und 3 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Science and Technological Development of the Republic of Serbia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum alloy EN AW-7049A samples in artificial (T6 temper) and after multi-stage aging (T77 temper, i.e. retrogression and reaging treatment- RRA), were investigated by means of differentialscanning calorimetry (DSC).DSC was employed to distinguish the dissolution behavior of different metastable and Cu-enriched precipitate populations in EN AW-7049A alloy in the T6 and T77 tempers. DSC thermographs exhibited two consecutive endothermic peaks in the T6 temper, which correspond to the sequential dissolution of metastable semi-coherent phases. First peak correspondsto the main strengthening η' phase, the second peak is associated with the dissolution of thermally more stable Cu-enriched η′/incipient η precipitates. These Cu-rich precipitates enhance yield strength and hardness by increasing dislocation resistance and significantly improve thermal stability by retarding precipitate coarsening and overaging.In the T77 temper, only a single endothermic peak was observed, indicating a reduced concentration of metastable η′ precipitates and the predominance of coarser η′ or incoherent equilibrium η precipitates formed during the retrogression and reaging treatment. The dissolution and transformation of metastable semi-coherent precipitates during RRA promote the nucleation and growth of the stable incoherent η phase, particularly at grain boundaries, leading to strength reduction. Consequently, the increased fraction and coarsening of η precipitates account for the lower strength of the EN AW-7049A alloy in the T77 temper compared with the initial T6 temper.

Förderung

  • Ministry of Education, Science and Technological Development of the Republic of Serbia

Zitieren

APA

Marinković, J., Fidanovski, B., Radović, L., & Radisavljević, I. (2025). Influence of retrogression and reaging heat treatment on calorimetric behavior of EN AW-7049a alloy. Scientific Technical Review, 75(2), 18-22. https://doi.org/10.5937/str2600003m

Vancouver

Marinković J, Fidanovski B, Radović L, Radisavljević I. Influence of retrogression and reaging heat treatment on calorimetric behavior of EN AW-7049a alloy. Scientific Technical Review. 2025;75(2):18-22. doi:10.5937/str2600003m

BibTeX
@article{Marinkovi2025,
  author = {Marinković, Jelena and Fidanovski, Bojana and Radović, Ljubica and Radisavljević, Igor},
  title = {Influence of retrogression and reaging heat treatment on calorimetric behavior of EN AW-7049a alloy},
  journal = {Scientific Technical Review},
  year = {2025},
  volume = {75},
  number = {2},
  pages = {18--22},
  doi = {10.5937/str2600003m}
}
Kostenlos starten →