EUVIMEDEUVIMED entdecken
Crossref

Thin layer modeling and determination of thermodynamic properties of tomato slices during hot air drying

Nwakuba Nnaemeka, Chukwuezie Osita, Asoegwu Sabbas, Nwandikom Godfrey, Okereke Ngozi

Poljoprivredna tehnika · 2018

DOI: 10.5937/poljteh1801039n ↗

Kurz gefasst

Fachartikel in der Zeitschrift Poljoprivredna tehnika, 2018. Verfasst von Nwakuba Nnaemeka und 4 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The drying kinetics and determination of thermodynamic properties of sliced tomato samples during hot air drying in a hybrid solar-electric crop dryer were presented. One kilogram batch of freshly harvested tomato samples were sliced to 10 mm thickness and dried at varying air velocities (1.0, 1.5 and 2.0 ms-1) and temperatures (50, 55, 60, 65, and 70oC) using the hybrid mode. In order to choose the best drying model, eight thin-layer mathematical models were fitted to the experimental data. The high values of coefficient of determination, R2 and the low values of reduced sum of squares error (SSE) and root mean square error (RMSE) indicated that the Midilli et al. model adequately described the drying process of tomato slices, with its highest R2 (0.9999), lowest SSE (0.1136) and lowest value of RMSE (0.0212) at 70oC temperature and 2.0 ms-1 air velocity. Arrhenius model was used to represent the drying constant as a function of temperature. The effective moisture diffusivity increased with increase in temperature and air velocity; with the highest value obtained at air velocity of 2.0 ms-1 and temperature of 70oC, whereas it was lowest at air velocity of 1.0 ms-1 and temperature of 50oC. The mean activation energy required to dry 1kg batch of 10 mm sliced tomato samples was 39.34 kJmol-1. Enthalpy and Gibbs free energy values were found to decrease with increasing drying temperature as well as the entropy which also exothermically decreased with temperature. Recommendations for further studies were stated.

Zitieren

APA

Nnaemeka, N., Osita, C., Sabbas, A., Godfrey, N., & Ngozi, O. (2018). Thin layer modeling and determination of thermodynamic properties of tomato slices during hot air drying. Poljoprivredna tehnika. https://doi.org/10.5937/poljteh1801039n

Vancouver

Nnaemeka N, Osita C, Sabbas A, Godfrey N, Ngozi O. Thin layer modeling and determination of thermodynamic properties of tomato slices during hot air drying. Poljoprivredna tehnika. 2018. doi:10.5937/poljteh1801039n

BibTeX
@article{Nnaemeka2018,
  author = {Nnaemeka, Nwakuba and Osita, Chukwuezie and Sabbas, Asoegwu and Godfrey, Nwandikom and Ngozi, Okereke},
  title = {Thin layer modeling and determination of thermodynamic properties of tomato slices during hot air drying},
  journal = {Poljoprivredna tehnika},
  year = {2018},
  doi = {10.5937/poljteh1801039n}
}
Kostenlos starten →