Enhancing the tribological properties and extending the service life of cutting tools and industrial components using hybrid PVD and PACVD (DLC) protective coatings
Mining and Metallurgy Engineering Bor · 2026 · (1) · 21-30
DOI: 10.5937/mmeb2601021g ↗Kurz gefasst
Fachartikel in der Zeitschrift Mining and Metallurgy Engineering Bor, 2026. Verfasst von Jelena Gligorijevic-Sokolović und 3 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Science and Technological Development of the Republic of Serbia.
Abstract (Originalsprache)
Hybrid physical vapor deposition (PVD) and plasma-assisted chemical vapor deposition (PACVD) technologies for depositing diamond-like carbon (DLC) coatings represent a modern, environmentally friendly and engineering-based approach to the surface protection of cutting tools and tribologically loaded industrial components. Unlike conventional thermal CVD processes, which require high temperatures (800-1000°C) and cause structural changes as well as tempering of previously hardened tool steels, hybrid PVD+PACVD systems operate in a low-temperature range (180-550°C; DLC deposition at ≤250-350°C). This regime fully preserves the microstructure, hardness and dimensional stability of the substrate. This paper analyses eight different types of coatings (TiN, AlTiN, CrN, TiCN, CrAlSiN, DLC, Al-TiN+DLC and CrN+DLC) using TOPSIS multi-criteria analysis with five key engineering criteria: hardness, thermal stability, corrosion resistance, friction coefficient and substrate compatibility. The results show that hybrid multilayer architectures AlTiN+DLC and CrN+DLC achieve the highest closeness coefficients (0.91 and 0.88, respectively), indicating a pronounced non-linear synergistic effect that cannot be achieved by applying individual layers. The paper defines a compatibility matrix, a decision tree and an algorithm for selecting the optimal coating architecture based on the dominant wear mechanisms in service. An analysis of contemporary industrial and literature data confirms that the application of hybrid PVD/PACVD systems enables a significant extension of the service life of cutting tools, sliding elements and machine components, while reducing friction, wear and energy losses. The technology is positioned within the concept of green tribology due to the complete absence of wastewater and harmful chemical effluents.
Förderung
- Ministry of Education, Science and Technological Development of the Republic of Serbia
Zitieren
APA
Gligorijevic-Sokolović, J., Petrović, A., Simonović, D., & Krstić, V. (2026). Enhancing the tribological properties and extending the service life of cutting tools and industrial components using hybrid PVD and PACVD (DLC) protective coatings. Mining and Metallurgy Engineering Bor, 21-30. https://doi.org/10.5937/mmeb2601021g
Vancouver
Gligorijevic-Sokolović J, Petrović A, Simonović D, Krstić V. Enhancing the tribological properties and extending the service life of cutting tools and industrial components using hybrid PVD and PACVD (DLC) protective coatings. Mining and Metallurgy Engineering Bor. 2026:21-30. doi:10.5937/mmeb2601021g
BibTeX
@article{GligorijevicSokolovi2026,
author = {Gligorijevic-Sokolović, Jelena and Petrović, Ana and Simonović, Danijela and Krstić, Vesna},
title = {Enhancing the tribological properties and extending the service life of cutting tools and industrial components using hybrid PVD and PACVD (DLC) protective coatings},
journal = {Mining and Metallurgy Engineering Bor},
year = {2026},
number = {1},
pages = {21--30},
doi = {10.5937/mmeb2601021g}
}
EUVIMED