EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of alkali-treated coconut coir mat lamination on the flexural, tensile, and water absorption behavior of plywood

Mohammed Nissar, Shantharam Patil, KN Chethan, Sawan Shetty, N M

Journal of Applied Engineering Science · 2026 · 24 (4) · 796-804

DOI: 10.5937/jaes0-70586 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Engineering Science, 2026. Verfasst von Mohammed Nissar und 4 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Natural fiber-reinforced wood composites are attracting interest as construction materials with a reduced reliance on synthetic reinforcement. Coconut coir is a widely available agricultural by-product with relatively low density, high toughness, and renewability, which makes it an interesting alternative reinforcement. This study examined 18 mm commercial plywood laminated with alkali-treated coconut coir fiber mats using bisphenol-A epoxy resin, in order to assess the effect of coir lamination on mechanical and moisture performance. Two configurations were studied: one-sided (OS) and both-sided (BS) lamination, with unlaminated plywood as the control. Static bending, tensile, and water absorption tests were carried out according to IS 1734 (Part 11):1983, IS 1734 (Part 9):1983, and IS 1734 (Part 6):1983, respectively, and the bending and tensile results (n = 4) were compared by one-way ANOVA with Tukey's test. Calculated on the total panel thickness, lamination lowered the modulus of elasticity (MOE) in both grain directions: by 15% (OS) and 19% (BS) along the grain, and by 28% (OS) and 46% (BS) across the grain. Because the across-grain direction was reduced more, the across/along MOE ratio fell from 1.59 for the control to 1.05 for the BS panel, so the random-mat coir layer reduced the anisotropy of the plywood rather than uniformly stiffening it. The BS panel retained its along-grain modulus of rupture (MOR) (-2%, not significant) but lost 18% across the grain, whereas the OS panel lost 39% along the grain. Tensile strength decreased in the BS panel by about 20% along and 22% across the grain, and in the OS panel by about 45% across the grain, the largest reduction (the along-grain reduction of 13% was not significant). Water absorption was lower in both laminated panels than in the control, by about 35% (OS) and 42% (BS) after 2 h and by about 36% (OS) and 43% (BS) after 24 h; the difference between OS and BS was small, which suggests that the continuous cured epoxy film is the likely main barrier. Any contribution of alkali treatment to fiber-matrix bonding is consistent with the literature but was not verified in this study. Although reinforcement is an agricultural by-product, the bisphenol-A epoxy matrix is petrochemical-based and not recyclable, so the environmental benefit is partial. The results suggest that coir lamination can modify the directional flexural behaviour and moisture uptake of plywood for furniture and interior applications, but it did not increase flexural modulus or strength on a section basis.

Zitieren

APA

Nissar, M., Patil, S., Chethan, K., Shetty, S., & M, N. (2026). Effect of alkali-treated coconut coir mat lamination on the flexural, tensile, and water absorption behavior of plywood. Journal of Applied Engineering Science, 24(4), 796-804. https://doi.org/10.5937/jaes0-70586

Vancouver

Nissar M, Patil S, Chethan K, Shetty S, M N. Effect of alkali-treated coconut coir mat lamination on the flexural, tensile, and water absorption behavior of plywood. Journal of Applied Engineering Science. 2026;24(4):796-804. doi:10.5937/jaes0-70586

BibTeX
@article{Nissar2026,
  author = {Nissar, Mohammed and Patil, Shantharam and Chethan, KN and Shetty, Sawan and M, N},
  title = {Effect of alkali-treated coconut coir mat lamination on the flexural, tensile, and water absorption behavior of plywood},
  journal = {Journal of Applied Engineering Science},
  year = {2026},
  volume = {24},
  number = {4},
  pages = {796--804},
  doi = {10.5937/jaes0-70586}
}
Kostenlos starten →