EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical and dynamic analysis of crankpin loads on a multi-cylinder diesel engine

Djamel Mazari, Soussa Abdelhalim, Khadidja Boualem, Mustapha Bordjane

Journal of Applied Engineering Science · 2026 · 24 (4) · 618-635

DOI: 10.5937/jaes0-61710 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Engineering Science, 2026. Verfasst von Djamel Mazari und 3 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The continuous increase in the specific power of diesel engines raises dynamic loads on the crankpin, reducing its fatigue life and bearing reliability. Although numerous studies have addressed the mechanical behavior of these components, few have examined how the connecting rod dynamic model affects the loads on the crankpin and the resulting stress distribution. This study develops an algorithm to analyze the dynamic behavior of the crankshaft-connecting rod system of a six-cylinder in-line diesel engine (MIDR 0635 40 M/3). The original contribution of this work is a systematic, quantitative comparison of crankpin loads from two distinct models: the two-lumped-mass connecting rod model (simplified model, neglecting the actual moment of inertia of the connecting rod) and the effective connecting rod model (with distributed inertia, preserving mass, center of gravity, and actual moment of inertia). In a second step, a finite element method (FEM) numerical simulation is carried out on the crankpin using Abaqus software. Two strength criteria are applied: the Von Mises criterion for equivalent stress evaluation, and the critical loading condition at top dead center (TDC), corresponding to the maximum combustion pressure (Pmax = 187.55 × 10⁻³ MN). The results show that the simplified model overestimates inertia forces and the shock parameter, with deviations reaching 6.6% compared to the effective model. The numerical Von Mises stresses obtained (128.9 MPa) are in good agreement with the analytical values (140.20 MPa), both below the material yield limit (560 MPa), confirming the validity of the proposed approach.

Zitieren

APA

Mazari, D., Abdelhalim, S., Boualem, K., & Bordjane, M. (2026). Numerical and dynamic analysis of crankpin loads on a multi-cylinder diesel engine. Journal of Applied Engineering Science, 24(4), 618-635. https://doi.org/10.5937/jaes0-61710

Vancouver

Mazari D, Abdelhalim S, Boualem K, Bordjane M. Numerical and dynamic analysis of crankpin loads on a multi-cylinder diesel engine. Journal of Applied Engineering Science. 2026;24(4):618-635. doi:10.5937/jaes0-61710

BibTeX
@article{Mazari2026,
  author = {Mazari, Djamel and Abdelhalim, Soussa and Boualem, Khadidja and Bordjane, Mustapha},
  title = {Numerical and dynamic analysis of crankpin loads on a multi-cylinder diesel engine},
  journal = {Journal of Applied Engineering Science},
  year = {2026},
  volume = {24},
  number = {4},
  pages = {618--635},
  doi = {10.5937/jaes0-61710}
}
Kostenlos starten →