Validation of the performance of HDPE-concrete as an alternative for sustainable construction
Journal of Applied Engineering Science · 2026 · 24 (2) · 227-243
DOI: 10.5937/jaes0-61618 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Engineering Science, 2026. Verfasst von Manuel Gutiérrez und 5 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Concrete is the most widely used material in global construction, which generates high demand for natural resources and a significant carbon footprint. In response to these challenges, incorporating plastic waste, such as high-density polyethylene (HDPE), has been proposed as a sustainable alternative to reduce dependence on natural aggregates and mitigate plastic pollution. This study evaluates the mechanical performance of concrete with partial replacements of HDPE at 2.5%, 5%, 7.5%, 10%, 15%, 20%, and 30% in sand to produce HDPE-concrete, which is compared against a control mix with 0% replacement. Optimal replacement percentages have been identified in the literature, and 64 specimens were prepared and tested to determine the concrete's behavior, including its strength and flexural performance, to validate the advantages and disadvantages of each replacement in the search for the optimal configuration of sustainable concrete. Results showed that 5% and 7.5% replacement levels achieved optimal compressive (409 kg/cm²) and flexural (49 kg/cm²) strengths, respectively. Although these mixes exhibit slower strength gain reaching peak values at 28 days, lower replacement rates showed superior 7-day strength. Conversely, higher replacement levels increased recycling volume, reduced unit weight and slump, and raised air content without compromising the paste-aggregate bond. The findings suggest that HDPE-concrete is a promising solution for the construction industry, as it not only promotes the circular economy of plastic waste but also offers adequate mechanical performance, making it a viable and eco-friendly alternative for building material production.
Zitieren
APA
Gutiérrez, M., Soriano, E., Sánchez, A., Calderón, J., García, L., & Salazar, C. (2026). Validation of the performance of HDPE-concrete as an alternative for sustainable construction. Journal of Applied Engineering Science, 24(2), 227-243. https://doi.org/10.5937/jaes0-61618
Vancouver
Gutiérrez M, Soriano E, Sánchez A, Calderón J, García L, Salazar C. Validation of the performance of HDPE-concrete as an alternative for sustainable construction. Journal of Applied Engineering Science. 2026;24(2):227-243. doi:10.5937/jaes0-61618
BibTeX
@article{Gutirrez2026,
author = {Gutiérrez, Manuel and Soriano, Erubey and Sánchez, Alejandro and Calderón, Julio and García, Leonel and Salazar, Carlos},
title = {Validation of the performance of HDPE-concrete as an alternative for sustainable construction},
journal = {Journal of Applied Engineering Science},
year = {2026},
volume = {24},
number = {2},
pages = {227--243},
doi = {10.5937/jaes0-61618}
}
EUVIMED