Mechanical damage assessment in concrete beams reinforced with steel and polypropylene fibers using ultrasonic pulse velocity testing
Journal of Applied Engineering Science · 2026 · 24 (2) · 213-226
DOI: 10.5937/jaes0-60077 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Engineering Science, 2026. Verfasst von Alvarado Sánchez und 4 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Concrete beams are structural elements primarily subjected to vertical loads, including self-weight (dead load) and externally applied actions (live load). The sustained interaction of these loads induces bending deformations. As with all structural materials, concrete beams experience mechanical damage when the applied stresses exceed their ultimate capacity, typically manifested through cracking, which occurs on the tensile face opposite the load application. For several decades, fiber reinforcement has been employed worldwide to enhance the physical and mechanical properties of concrete, particularly its residual strength and crack control. In this study, concrete specimens were reinforced with two types of fibers-steel and polypropylene-and evaluated using ultrasonic pulse velocity (UPV) testing to characterize mechanical damage. After curing time, UPV measurements were taken to assess internal damage development under flexural loading. Based on the experimental data, predictive equations are proposed to estimate mechanical damage as a function of pulse velocity, allowing for improved evaluation of reinforced concrete behavior under stress.
Zitieren
APA
Sánchez, A., Ospina, G., Carrillo, L., Parra, G., & Chaves, P. (2026). Mechanical damage assessment in concrete beams reinforced with steel and polypropylene fibers using ultrasonic pulse velocity testing. Journal of Applied Engineering Science, 24(2), 213-226. https://doi.org/10.5937/jaes0-60077
Vancouver
Sánchez A, Ospina G, Carrillo L, Parra G, Chaves P. Mechanical damage assessment in concrete beams reinforced with steel and polypropylene fibers using ultrasonic pulse velocity testing. Journal of Applied Engineering Science. 2026;24(2):213-226. doi:10.5937/jaes0-60077
BibTeX
@article{Snchez2026,
author = {Sánchez, Alvarado and Ospina, García and Carrillo, León and Parra, Gomez and Chaves, Pabón},
title = {Mechanical damage assessment in concrete beams reinforced with steel and polypropylene fibers using ultrasonic pulse velocity testing},
journal = {Journal of Applied Engineering Science},
year = {2026},
volume = {24},
number = {2},
pages = {213--226},
doi = {10.5937/jaes0-60077}
}
EUVIMED