Calculation of the multi-blade rotary-friction tool's cutting cupped cutter to strength in the Ansys WB surrounding
Journal of Applied Engineering Science · 2020
DOI: 10.5937/jaes0-24328 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Engineering Science, 2020. Verfasst von Asset Rakishev und 7 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The authors developed the design of a special multi-blade rotary-friction tool. The multi-blade rotary-friction tool is equipped with two cupped cutters - heating and cutting. The heating cupped cutter is made of medium-carbon structural steel of any brand, and the cutting cupped cutter is made of steel R6M5. The final formation of the treated surface and its quality is provided by the cutting cupped cutter. This article presents the results of the calculation of the strength of the cutting cupped cutter multi-blade rotary friction tool.As a result, the following were established: when processing steels 30HGSA cutting force components reach the maximum value than when processing materials 40HN2MA, St.45, and St.3c (calm); strength and rigidity of the cutting cupped cutter is sufficient for processing optimal cutting conditions: nsp = 1000 rpm; S = 0.42 mm/rot; t = 1.0 mm.
Zitieren
APA
Rakishev, A., Sagitov, A., Donenbaev, B., Sherov, K., Tussupova, S., Smakova, N., Mazdubay, A., & Imanbaev, Y. (2020). Calculation of the multi-blade rotary-friction tool's cutting cupped cutter to strength in the Ansys WB surrounding. Journal of Applied Engineering Science. https://doi.org/10.5937/jaes0-24328
Vancouver
Rakishev A, Sagitov A, Donenbaev B, Sherov K, Tussupova S, Smakova N, et al. Calculation of the multi-blade rotary-friction tool's cutting cupped cutter to strength in the Ansys WB surrounding. Journal of Applied Engineering Science. 2020. doi:10.5937/jaes0-24328
BibTeX
@article{Rakishev2020,
author = {Rakishev, Asset and Sagitov, Almat and Donenbaev, Bakytzhan and Sherov, Karibek and Tussupova, Sayagul and Smakova, Nurgul and Mazdubay, Asylkhan and Imanbaev, Yernat},
title = {Calculation of the multi-blade rotary-friction tool's cutting cupped cutter to strength in the Ansys WB surrounding},
journal = {Journal of Applied Engineering Science},
year = {2020},
doi = {10.5937/jaes0-24328}
}
EUVIMED