Hoop stresses in porous thick-walled concrete cylinders using rheological-dynamical analogy and drucker-prager yield criterion
Gradjevinski materijali i konstrukcije · 2026 · (00) · 26-26
DOI: 10.5937/grmk2600026m ↗Kurz gefasst
Fachartikel in der Zeitschrift Gradjevinski materijali i konstrukcije, 2026. Verfasst von Dragan Milašinović und 1 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben.
Abstract (Originalsprache)
A new iterative method for modeling the inelastic behavior of concrete structures from the elastic range to ultimate loading is presented through an analogy with damped dynamic systems. This analogy simplifies complex nonlinear structural responses into solvable linearized equations that describe viscoelastic-plastic effects. The model predicts the strain hardening rule for concrete. The yield conditions are generalized using the Drucker-Prager (DP) criterion with an associated flow rule. The parameters of the DP criterion are investigated both theoretically and experimentally, with and without considering the influence of porosity. Standard concrete cylinders tested to failure under compression are analyzed for both normal-strength and high-strength concretes. The creep coefficient plays a key role in the viscoelastic-plastic response and in determining porosity thresholds. Thick-walled concrete cylinders are analyzed throughout their service life using the finite element software ABAQUS. Instead of entering the porosity into the software as fixed experimental data, it is generated within the model via boundary energy states. With this step, the analogy becomes a constitutive theory that attempts to explain the micro-mechanics of damage. The main results indicate that the normal cohesive stresses in thick-walled cylinders correspond to hoop stresses and reach their peak values at the elastic limit.
Zitieren
APA
Milašinović, D., & Mrđa-Bošnjak, N. (2026). Hoop stresses in porous thick-walled concrete cylinders using rheological-dynamical analogy and drucker-prager yield criterion. Gradjevinski materijali i konstrukcije, 26-26. https://doi.org/10.5937/grmk2600026m
Vancouver
Milašinović D, Mrđa-Bošnjak N. Hoop stresses in porous thick-walled concrete cylinders using rheological-dynamical analogy and drucker-prager yield criterion. Gradjevinski materijali i konstrukcije. 2026:26-26. doi:10.5937/grmk2600026m
BibTeX
@article{Milainovi2026,
author = {Milašinović, Dragan and Mrđa-Bošnjak, Nataša},
title = {Hoop stresses in porous thick-walled concrete cylinders using rheological-dynamical analogy and drucker-prager yield criterion},
journal = {Gradjevinski materijali i konstrukcije},
year = {2026},
number = {00},
pages = {26--26},
doi = {10.5937/grmk2600026m}
}
EUVIMED