Navigating circular economy in key construction materials: Part 1 - General regulations and reuse, recycling, and circular practices for steel and timber
Gradjevinski materijali i konstrukcije · 2026 · 69 (sp.iss.) · 83-136
DOI: 10.5937/grmk2600007m ↗Kurz gefasst
Fachartikel in der Zeitschrift Gradjevinski materijali i konstrukcije, 2026. Verfasst von Mirjana Malešev und 12 weiteren Autor:innen. Die Arbeit nennt 93 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0). Gefördert von: The authors acknowledge the support of the COST Action CA21103 Circular B.
Abstract (Originalsprache)
Construction and demolition waste represents one of the largest waste streams worldwide and plays a central role in achieving circular economy objectives in the built environment. This study aims to systematize and synthesize recent knowledge on the potential for reuse and recycling of key construction materials - steel, timber, concrete, and bricks and blocks - at the end of their service life. The research is structured in two papers: Part 1 focuses on regulatory frameworks, recycling rates, and reuse and recycling practices for steel and timber, while Part 2 addresses concrete and bricks and blocks. The objective was to identify opportunities for reuse and higher-value recycling as more effective circular solutions. The results indicate that, although the European regulatory framework for C&DW is well developed and aligned with circular economy principles, significant gaps remain, particularly the lack of harmonized end-of-waste criteria and quality standards for most material fractions. Consequently, high reported recovery rates often conceal downcycling practices and limited material circularity. Steel exhibits consistently high recycling rates, driven by strong market demand and established regulatory criteria, while direct reuse remains marginal. In contrast, timber recovery is dominated by energy recovery, with material recycling and reuse constrained by heterogeneous material quality, limited classification systems, and insufficient policy support.
Förderung
- The authors acknowledge the support of the COST Action CA21103 Circular B
Zitieren
APA
Malešev, M., Radonjanin, V., Askar, R., Nadaždi, A., Bas, B., Rajić, M., Celik, M., Avşar, E., Starčev-Ćurčin, A., Bulatović, V., Dönmez, Ç., Lukić, I., & Kočetov-Mišulić, T. (2026). Navigating circular economy in key construction materials: Part 1 - General regulations and reuse, recycling, and circular practices for steel and timber. Gradjevinski materijali i konstrukcije, 69(sp.iss.), 83-136. https://doi.org/10.5937/grmk2600007m
Vancouver
Malešev M, Radonjanin V, Askar R, Nadaždi A, Bas B, Rajić M, et al. Navigating circular economy in key construction materials: Part 1 - General regulations and reuse, recycling, and circular practices for steel and timber. Gradjevinski materijali i konstrukcije. 2026;69(sp.iss.):83-136. doi:10.5937/grmk2600007m
BibTeX
@article{Maleev2026,
author = {Malešev, Mirjana and Radonjanin, Vlastimir and Askar, Rand and Nadaždi, Ana and Bas, Bilge and Rajić, Milena and Celik, Madenli and Avşar, Edip and Starčev-Ćurčin, Anka and Bulatović, Vesna and Dönmez, Çavdar and Lukić, Ivan and Kočetov-Mišulić, Tatjana},
title = {Navigating circular economy in key construction materials: Part 1 - General regulations and reuse, recycling, and circular practices for steel and timber},
journal = {Gradjevinski materijali i konstrukcije},
year = {2026},
volume = {69},
number = {sp.iss.},
pages = {83--136},
doi = {10.5937/grmk2600007m}
}
EUVIMED