EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Carbonation of limestone powder concrete: State-of-the-art overview

Matija Marinković, Andrija Radović, Vedran Carević

Gradjevinski materijali i konstrukcije · 2023 · 66 (2) · 127-139

DOI: 10.5937/grmk2300005m ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gradjevinski materijali i konstrukcije, 2023. Verfasst von Matija Marinković und 2 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recently, research into finding long-term solutions to CO2 mitigation in the cement and concrete sectors was initiated since commonly used supplementary cementitious materials are not globally available in sufficient amounts. One of the possible solutions to that problem is to develop concrete with a higher percentage of limestone in the powder phase. This work presents a critical overview of the state-of-the-art in the field of the carbonation resistance of limestone powder concrete. Experimental research performed so far has shown that if the simple replacement of cement with limestone powder is applied in the standard mix design, a maximum of 10-15% of cement (clinker) could be replaced to maintain similar carbonation resistance. It has also been proven that the dilution effect of weakly inert limestone powder can be compensated for with several measures in the mix design of concrete. By adjusting the cement, limestone, and water content and their particle size distribution, it is feasible to design concrete formulations with up to 50% limestone in the powder phase that are comparable to referent Portland cement concrete in terms of rheological and mechanical performance and carbonation resistance. This is an environmentally significant reduction in the clinker content, but it comes at the cost of a larger superplasticizer content. Prediction models for the carbonation resistance of the limestone powder concrete are poorly developed. Amongst them, the fib MC 2010 prediction model is considered relatively simple and robust; however, it has not yet been proven that the model is applicable to concrete with a higher content of limestone powder (>15-20% of the powder phase). The future research should be oriented towards further optimization of the concrete mix design and implementing this model on the middle-and high-content limestone concrete carbonation.

Zitieren

APA

Marinković, M., Radović, A., & Carević, V. (2023). Carbonation of limestone powder concrete: State-of-the-art overview. Gradjevinski materijali i konstrukcije, 66(2), 127-139. https://doi.org/10.5937/grmk2300005m

Vancouver

Marinković M, Radović A, Carević V. Carbonation of limestone powder concrete: State-of-the-art overview. Gradjevinski materijali i konstrukcije. 2023;66(2):127-139. doi:10.5937/grmk2300005m

BibTeX
@article{Marinkovi2023,
  author = {Marinković, Matija and Radović, Andrija and Carević, Vedran},
  title = {Carbonation of limestone powder concrete: State-of-the-art overview},
  journal = {Gradjevinski materijali i konstrukcije},
  year = {2023},
  volume = {66},
  number = {2},
  pages = {127--139},
  doi = {10.5937/grmk2300005m}
}
Kostenlos starten →