EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and calculation of test stand for testing personal fall protection equipment according to EN 364

Milan Bižić, Dragan Petrović

Engineering Today · 2026 · 5 (1) · 37-42

DOI: 10.5937/engtoday2600013b ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering Today, 2026. Verfasst von Milan Bižić und 1 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Science and Technological Development of the Republic of Serbia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the design and calculation of a test stand intended for testing personal fall protection equipment in accordance with the requirements of the international standard EN 364. The objective of the study was to develop a reliable, safe, and structurally adequate test stand capable of performing both static and dynamic tests on components of fall arrest systems, including different types of personal fall protection systems, fall-arresters, anchor lines, safety harnesses, lanyards, energy absorbers, and connecting elements. The paper analyzes the requirements of EN 364 and defines the functional and structural characteristics of the test stand. Particular emphasis was placed on the static strength of the supporting structure, which was designed to withstand the maximum prescribed test forces without permanent deformation or structural failure, ensuring an adequate safety factor under the most unfavorable loading conditions. Furthermore, the dynamic performance of the test stand was analyzed through the evaluation of its natural frequencies, in accordance with standard requirements. The obtained calculation results confirm that the designed test stand fully complies with the requirements of EN 364 and enables accurate, reliable, and safe testing of personal fall protection equipment, thereby contributing to improved occupational safety and compliance with relevant standards.

Förderung

  • Ministry of Education, Science and Technological Development of the Republic of Serbia

Zitieren

APA

Bižić, M., & Petrović, D. (2026). Design and calculation of test stand for testing personal fall protection equipment according to EN 364. Engineering Today, 5(1), 37-42. https://doi.org/10.5937/engtoday2600013b

Vancouver

Bižić M, Petrović D. Design and calculation of test stand for testing personal fall protection equipment according to EN 364. Engineering Today. 2026;5(1):37-42. doi:10.5937/engtoday2600013b

BibTeX
@article{Bii2026,
  author = {Bižić, Milan and Petrović, Dragan},
  title = {Design and calculation of test stand for testing personal fall protection equipment according to EN 364},
  journal = {Engineering Today},
  year = {2026},
  volume = {5},
  number = {1},
  pages = {37--42},
  doi = {10.5937/engtoday2600013b}
}
Kostenlos starten →