Design and Ergonomic Evaluation of an Automated Wheelchair Lifting Aid for Caregiver Injury Prevention
Equivalent: Jurnal Ilmiah Sosial Teknik · 13.11.2026 · 8 (6) · 2398-2415
DOI: 10.59261/jequi.v8i6.481 ↗Kurz gefasst
Fachartikel in der Zeitschrift Equivalent: Jurnal Ilmiah Sosial Teknik, online erschienen am 13.11.2026. Verfasst von Wawan Yudiantyo und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
Background
Manual handling during wheelchair loading and unloading imposes substantial biomechanical demands on caregivers, potentially contributing to work-related musculoskeletal disorders (WMSDs) because of non-neutral working postures and increased spinal loading, particularly at the L5/S1 lumbosacral junction.
Objective
This study proposes the design, development, and ergonomic evaluation of an electromechanical assistive lifting device integrated into the cargo compartment of a Toyota Avanza multipurpose vehicle (MPV).
Methods
A 12-V DC electric winch equipped with a swiveling boom arm and a quick-release sling harness was evaluated during caregiver-assisted wheelchair loading and unloading tasks involving three wheelchair configurations: a standard manual wheelchair (17 kg), a Type A powered wheelchair, and a Type B powered wheelchair (weighing up to 28 kg). Functional compatibility and observable caregiver working postures were assessed before and after device implementation.
Results
Automated lifting system successfully demonstrated proof-of-concept operation with all three wheelchair configurations. Compared with manual handling, assisted loading reduced the need for non-neutral caregiver postures, including approximately 30° of backward trunk extension and approximately 75° of asymmetric lower-extremity bracing. By replacing manual lifting effort with electromechanical assistance, the device enabled the caregiver to maintain a more upright working posture during the demonstrated operations. However, repeated trial counts were not documented; therefore, no statistical success rate or quantified reduction in biomechanical loading can be established.
Conclusion
Proof-of-concept device demonstrated functional feasibility and the potential to reduce non-neutral caregiver postures during wheelchair loading and unloading. Its integration into the vehicle cargo compartment offers a practical retrofit concept for assisted wheelchair transportation.
Zitieren
APA
Yudiantyo, W., Andrijanto, A., & Wirawan, C. (2026). Design and Ergonomic Evaluation of an Automated Wheelchair Lifting Aid for Caregiver Injury Prevention. Equivalent: Jurnal Ilmiah Sosial Teknik, 8(6), 2398-2415. https://doi.org/10.59261/jequi.v8i6.481
Vancouver
Yudiantyo W, Andrijanto A, Wirawan C. Design and Ergonomic Evaluation of an Automated Wheelchair Lifting Aid for Caregiver Injury Prevention. Equivalent: Jurnal Ilmiah Sosial Teknik. 2026;8(6):2398-2415. doi:10.59261/jequi.v8i6.481
BibTeX
@article{Yudiantyo2026,
author = {Yudiantyo, Wawan and Andrijanto, Andrijanto and Wirawan, Christina},
title = {Design and Ergonomic Evaluation of an Automated Wheelchair Lifting Aid for Caregiver Injury Prevention},
journal = {Equivalent: Jurnal Ilmiah Sosial Teknik},
year = {2026},
volume = {8},
number = {6},
pages = {2398--2415},
doi = {10.59261/jequi.v8i6.481}
}
EUVIMED