EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Mechanical Test of Mortar with Addition of Fly Ash Using Seawater Immersion

Muh. Sayfullah. S, Muhammad Abdu, Arjun Arjun

Equivalent: Jurnal Ilmiah Sosial Teknik · 05.11.2026 · 8 (5) · 2115-2125

DOI: 10.59261/jequi.v8i5.474 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Equivalent: Jurnal Ilmiah Sosial Teknik, online erschienen am 05.11.2026. Verfasst von Muh. Sayfullah. S und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

The rapid pace of infrastructure development has increased the demand for more environmentally friendly cement-based binders. One potential approach is the use of fly ash as a supplementary cementitious material in mortar.

Objective

To determine the compressive strength of mortar and evaluate the effects of fly ash replacement at proportions of 0%, 5%, 10%, and 15% by weight of cement, using two curing media: seawater and freshwater.

Method

This study employed a quantitative experimental approach involving laboratory testing to evaluate the effects of varying fly ash replacement proportions on the compressive strength and water absorption of mortar specimens cured in two different media.

Results

The compressive strength of mortar increased with increasing fly ash content and curing age in both curing media. The highest value was obtained with 15% fly ash replacement after 28 days of freshwater curing, reaching 31.53 kN, whereas seawater curing under the same conditions yielded 22.90 kN. Freshwater curing consistently resulted in higher compressive strength than seawater curing across all fly ash replacement proportions. Conversely, the 28-day water absorption test showed that specimens cured in seawater exhibited relatively higher water absorption than those cured in freshwater.

Conclusion

Chloride, calcium, magnesium, and sulfate ions in seawater may influence cement hydration. These effects may accelerate early-age strength development but may also increase porosity and compromise long-term durability. These findings provide preliminary insights into the potential benefits and limitations of using seawater as a curing medium for mortar.

Zitieren

APA

S, M. S., Abdu, M., & Arjun, A. (2026). Mechanical Test of Mortar with Addition of Fly Ash Using Seawater Immersion. Equivalent: Jurnal Ilmiah Sosial Teknik, 8(5), 2115-2125. https://doi.org/10.59261/jequi.v8i5.474

Vancouver

S MS, Abdu M, Arjun A. Mechanical Test of Mortar with Addition of Fly Ash Using Seawater Immersion. Equivalent: Jurnal Ilmiah Sosial Teknik. 2026;8(5):2115-2125. doi:10.59261/jequi.v8i5.474

BibTeX
@article{S2026,
  author = {S, Muh. Sayfullah. and Abdu, Muhammad and Arjun, Arjun},
  title = {Mechanical Test of Mortar with Addition of Fly Ash Using Seawater Immersion},
  journal = {Equivalent: Jurnal Ilmiah Sosial Teknik},
  year = {2026},
  volume = {8},
  number = {5},
  pages = {2115--2125},
  doi = {10.59261/jequi.v8i5.474}
}
Kostenlos starten →