EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

The Effect of Compression Casting Technique on Epoxy Polymer Concrete Using Recycled Coarse Aggregate

Khusnul Aldi Saputra, Eva Arifi, Desy Setyowulan

Equivalent: Jurnal Ilmiah Sosial Teknik · 20.06.2026 · 8 (2) · 574-592

DOI: 10.59261/jequi.v8i2.330 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Equivalent: Jurnal Ilmiah Sosial Teknik, online erschienen am 20.06.2026. Verfasst von Khusnul Aldi Saputra und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

The utilization of recycled coarse aggregate in polymer concrete is a prospective approach to support sustainable construction, but the presence of old mortar on RCA tends to increase material porosity and heterogeneity. At the same time, epoxy-based polymer concrete is highly sensitive to internal voids because micro-defects can reduce stress transfer efficiency and accelerate damage.

Objective

This study aims to evaluate the effect of the compression casting technique on the physical and mechanical properties of 100% RCA-based epoxy polymer concrete, focusing on compressive strength, water absorption, and specific gravity.

Methods

The base mixture used a semi-dry consistency with a binder matrix of Bisphenol-A epoxy resin (Bakelite® EPR 174) and cycloaliphatic amine hardener (Bakelite® EPH 555), along with Type C fly ash as a mineral filler. 50 × 50 × 50 mm cube specimens were made at four initial pressure levels, namely 0.00, 3.60, 4.80, and 6.00 MPa, each with three replications. Compressive strength testing was conducted referring to ASTM C579 Method B, water absorption based on ASTM C413 Method B, and specific gravity using the hydrostatic method based on ASTM D792.

Results

The results showed that compression casting significantly enhanced material densification. The mean compressive strength increased from 33.754 MPa in specimens without compaction to 57.426 MPa at 3.60 MPa and reached an optimum value of 60.190 MPa at 4.80 MPa, before decreasing to 54.009 MPa at 6.00 MPa; outlier screening using the Grubbs method indicated no data were eliminated. Simultaneously, the mean water absorption decreased from 1.563% to 0.387%, 0.233%, and 0.216%, while the mean specific gravity increased from 2.162 g/cm³ to 2.248, 2.272, and 2.309 g/cm³ for the 3.60, 4.80, and 6.00 MPa levels, respectively. These findings confirm that compression casting effectively improves the internal structure of RCA-based epoxy polymer concrete by reducing connected voids and increasing packing density. However, excessive pressure tended to decrease the mean compressive strength due to potential local non-uniformity and densification heterogeneity.

Conclusion

Thus, a pressure of 4.80 MPa can be identified as the optimum compaction level to maximize compressive strength, whereas 6.00 MPa is more effective in improving physical properties such as specific gravity and absorption reduction.

Zitieren

APA

Saputra, K. A., Arifi, E., & Setyowulan, D. (2026). The Effect of Compression Casting Technique on Epoxy Polymer Concrete Using Recycled Coarse Aggregate. Equivalent: Jurnal Ilmiah Sosial Teknik, 8(2), 574-592. https://doi.org/10.59261/jequi.v8i2.330

Vancouver

Saputra KA, Arifi E, Setyowulan D. The Effect of Compression Casting Technique on Epoxy Polymer Concrete Using Recycled Coarse Aggregate. Equivalent: Jurnal Ilmiah Sosial Teknik. 2026;8(2):574-592. doi:10.59261/jequi.v8i2.330

BibTeX
@article{Saputra2026,
  author = {Saputra, Khusnul Aldi and Arifi, Eva and Setyowulan, Desy},
  title = {The Effect of Compression Casting Technique on Epoxy Polymer Concrete Using Recycled Coarse Aggregate},
  journal = {Equivalent: Jurnal Ilmiah Sosial Teknik},
  year = {2026},
  volume = {8},
  number = {2},
  pages = {574--592},
  doi = {10.59261/jequi.v8i2.330}
}
Kostenlos starten →