EUVIMEDEUVIMED entdecken
Crossref

Petrophysical Analysis of the Upper Qamchuqa Reservoir Using Well LOG Data From Well X-1 in the Garmian Area, Northern Iraq

Avin A. Molad, Dler H. Baban

IRAQI BULLETIN OF GEOLOGY AND MINING · 27.08.2026 · 22 (1) · 39-69

DOI: 10.59150/ibgm2201a03 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IRAQI BULLETIN OF GEOLOGY AND MINING, online erschienen am 30.06.2026. Verfasst von Avin A. Molad und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Petrophysical characteristics of the Upper Qamchuqa Formation were analyzed at well X-1 in the Garmian Area in Northern Iraq using the available conventional wireline log data. The majority of the formation consists of dolostone, dolomitic limestone, and limestone. The formation generally contains less than 10% of shaliness (clean zone), which is distributed mostly in a dispersed pattern. The average effective porosity is about 12% and is considered fair porosity; however, it exceeds 20% at some intervals. No obvious gas zones were identified due to the lack of a significant separation between the density and neutron porosity curves. Secondary porosity is present throughout the entirety of the formation at a rate of approximately 4%. Movable hydrocarbons are distributed throughout the formation, exhibiting minor water saturation in the lowest part. The average water saturation is approximately 26%. The saturation of the residual and movable hydrocarbons exceeds the volume of water. In the middle part of the formation, the volume of the movable hydrocarbons is almost equivalent to that of the residual hydrocarbons, and at specific depths, it surpasses the volume of the residual hydrocarbons. The average permeability for the entire studied section of the Upper Qamchuqa Formation is 204 millidarcy. The formation in the studied well consists of four reservoir units when the variations in shale volume, porosity, permeability, and water saturations are considered, and includes six distinct hydraulic flow units determined by using the flow zone indicator values. Reservoir Unit 2 and the lower section of Reservoir Unit 3 possess the greatest quantity of movable hydrocarbons. They could be deemed the most productive zones.

Zitieren

APA

Molad, A. A., & Baban, D. H. (2026). Petrophysical Analysis of the Upper Qamchuqa Reservoir Using Well LOG Data From Well X-1 in the Garmian Area, Northern Iraq. IRAQI BULLETIN OF GEOLOGY AND MINING, 22(1), 39-69. https://doi.org/10.59150/ibgm2201a03

Vancouver

Molad AA, Baban DH. Petrophysical Analysis of the Upper Qamchuqa Reservoir Using Well LOG Data From Well X-1 in the Garmian Area, Northern Iraq. IRAQI BULLETIN OF GEOLOGY AND MINING. 2026;22(1):39-69. doi:10.59150/ibgm2201a03

BibTeX
@article{Molad2026,
  author = {Molad, Avin A. and Baban, Dler H.},
  title = {Petrophysical Analysis of the Upper Qamchuqa Reservoir Using Well LOG Data From Well X-1 in the Garmian Area, Northern Iraq},
  journal = {IRAQI BULLETIN OF GEOLOGY AND MINING},
  year = {2026},
  volume = {22},
  number = {1},
  pages = {39--69},
  doi = {10.59150/ibgm2201a03}
}
Kostenlos starten →