EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimizing Thermal Management of Lithium-Ion Batteries Using Mini-Channel Cold Plates: Analysis of Cooling Fluids and Flow Rate Variations using CFD

Iwan Setyawan, Angga Ainul Yaqien, Ridwan Ridwan, I Wayan Sutina, Adi Winarta

Journal of Applied Science and Advanced Engineering · 18.04.2026 · 4 (1) · 37-45

DOI: 10.59097/jasae.v4i1.72 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Science and Advanced Engineering, online erschienen am 18.04.2026. Verfasst von Iwan Setyawan und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficient thermal management is critical for improving the safety, performance, and service life of lithium-ion batteries, especially in electric-vehicle applications. This study evaluates a mini-channel cold-plate system by examining the effects of coolant type, mass flow rate, and channel enhancement on heat dissipation using computational fluid dynamics (CFD) supported by experimental validation. Four fluids, namely water, acetone, ethanol, and methane, were examined at mass flow rates of 1×10-5, 1×10-4, and 1×10-3 kg/s. Among the tested fluids, acetone produced the lowest maximum battery temperature of 28.0 °C at 1×10-3 kg/s, while methane showed the weakest thermal performance. Increasing the mass flow rate consistently reduced battery temperature, but it also increased pressure drop and pumping-power demand. The results indicate that coolant selection should be based not only on thermal performance, but also on pumping-power penalty, safety, and environmental considerations. Although acetone delivered the best cooling performance in this study, its flammability limits its immediate practical adoption. The findings provide design guidance for the development of more effective mini-channel cooling systems for lithium-ion batteries.

Zitieren

APA

Setyawan, I., Yaqien, A. A., Ridwan, R., Sutina, I. W., & Winarta, A. (2026). Optimizing Thermal Management of Lithium-Ion Batteries Using Mini-Channel Cold Plates: Analysis of Cooling Fluids and Flow Rate Variations using CFD. Journal of Applied Science and Advanced Engineering, 4(1), 37-45. https://doi.org/10.59097/jasae.v4i1.72

Vancouver

Setyawan I, Yaqien AA, Ridwan R, Sutina IW, Winarta A. Optimizing Thermal Management of Lithium-Ion Batteries Using Mini-Channel Cold Plates: Analysis of Cooling Fluids and Flow Rate Variations using CFD. Journal of Applied Science and Advanced Engineering. 2026;4(1):37-45. doi:10.59097/jasae.v4i1.72

BibTeX
@article{Setyawan2026,
  author = {Setyawan, Iwan and Yaqien, Angga Ainul and Ridwan, Ridwan and Sutina, I Wayan and Winarta, Adi},
  title = {Optimizing Thermal Management of Lithium-Ion Batteries Using Mini-Channel Cold Plates: Analysis of Cooling Fluids and Flow Rate Variations using CFD},
  journal = {Journal of Applied Science and Advanced Engineering},
  year = {2026},
  volume = {4},
  number = {1},
  pages = {37--45},
  doi = {10.59097/jasae.v4i1.72}
}
Kostenlos starten →