Evaluación de calidad de muestreo en vainas Terzaghi y Moretto: análisis de deformación micromorfológica, porcentaje de recuperación y contraste con muestras inalteradas.
Revista de Geología Aplicada a la Ingeniería y al Ambiente · 24.06.2026 · (53)
DOI: 10.59069/24225703e041 ↗Kurz gefasst
Fachartikel in der Zeitschrift Revista de Geología Aplicada a la Ingeniería y al Ambiente, online erschienen am 24.06.2026. Verfasst von Sabrina Rouzaut und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
This work evaluates the influence of the type of quality of samples obtained from collapsible loess soils using the Standard Penetration Test (SPT).The research, conducted in Córdoba city (Argentina), compares the performance of the standard Terzaghi sampler against the Moretto sampler, analyzing variables such as recovery percentage, micromorphological deformation, and plugging at the cutting shoe. The methodology included the execution of four SPT soundings (with and without lubrication) and the extraction of undisturbed block samples for control purposes. Physical characterization, double oedometer tests, and thin-section analyses using optical microscopy were performed. Results demonstrate that the recovery percentage is highly sensitive to soil-sampler interaction: plugging at the cutting shoe correlates directly with low recovery rates and greater structural disturbance. Micromorphologically, samples obtained using the Terzaghi sampler without lubrication exhibited a systematic pattern of fissures induced by driving. Conversely, the use of the Moretto sampler combined with lubrication significantly minimized internal friction and alteration of the original soil fabric. It is concluded that increasing the area ratio (larger diameter) and reducing side friction are critical for preserving structural integrity in metastable silts, suggesting methodological adjustments to optimize geotechnical exploration in this soil typology.
Zitieren
APA
Rouzaut, S., & Eveling, P. A. (2026). Evaluación de calidad de muestreo en vainas Terzaghi y Moretto: análisis de deformación micromorfológica, porcentaje de recuperación y contraste con muestras inalteradas. Revista de Geología Aplicada a la Ingeniería y al Ambiente. https://doi.org/10.59069/24225703e041
Vancouver
Rouzaut S, Eveling PA. Evaluación de calidad de muestreo en vainas Terzaghi y Moretto: análisis de deformación micromorfológica, porcentaje de recuperación y contraste con muestras inalteradas. Revista de Geología Aplicada a la Ingeniería y al Ambiente. 2026. doi:10.59069/24225703e041
BibTeX
@article{Rouzaut2026,
author = {Rouzaut, Sabrina and Eveling, Pablo Agustín},
title = {Evaluación de calidad de muestreo en vainas Terzaghi y Moretto: análisis de deformación micromorfológica, porcentaje de recuperación y contraste con muestras inalteradas},
journal = {Revista de Geología Aplicada a la Ingeniería y al Ambiente},
year = {2026},
number = {53},
doi = {10.59069/24225703e041}
}
EUVIMED