EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Pengaruh Arus Pengelasan Terhadap Kekerasan Hasil LasPelat Baja Karbon S45c Dengan Proses SMAW

Tulus Swasono, Emon Azriadi

Jurnal Sains dan Ilmu Terapan · 2018

DOI: 10.59061/jsit.v1i2.119 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Sains dan Ilmu Terapan, 2018. Verfasst von Tulus Swasono und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Welding is a process of joining two or more metals which is widely applied in the industrial world. To get good welding results, it is necessary to choose the right amount of current. In this study, variations in the amount of current used were 60 A, 70 A and 80 A for welding S45C carbon steel plates, using the SMAW welding method. The results of the welding were then tested for hardness using the Rockwell HRB scale method in the weld metal, HAZ, and base metal areas. From the results of this study, the hardness value in the weld metal area was higher than the hardness value in the HAZ and base metal areas. And a good current used in welding S45C carbon steel plates is a welding current of 80 A.

Zitieren

APA

Swasono, T., & Azriadi, E. (2018). Pengaruh Arus Pengelasan Terhadap Kekerasan Hasil LasPelat Baja Karbon S45c Dengan Proses SMAW. Jurnal Sains dan Ilmu Terapan. https://doi.org/10.59061/jsit.v1i2.119

Vancouver

Swasono T, Azriadi E. Pengaruh Arus Pengelasan Terhadap Kekerasan Hasil LasPelat Baja Karbon S45c Dengan Proses SMAW. Jurnal Sains dan Ilmu Terapan. 2018. doi:10.59061/jsit.v1i2.119

BibTeX
@article{Swasono2018,
  author = {Swasono, Tulus and Azriadi, Emon},
  title = {Pengaruh Arus Pengelasan Terhadap Kekerasan Hasil LasPelat Baja Karbon S45c Dengan Proses SMAW},
  journal = {Jurnal Sains dan Ilmu Terapan},
  year = {2018},
  doi = {10.59061/jsit.v1i2.119}
}
Kostenlos starten →