EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Analisis Perbaikan Kualitas Produk Besi Beton Ulir dengan Pendekatan DMAIC dan Poka Yoke di PT X

Mochammad Wildani Akbar, Manik Ayu Titisari

JURNAL ILMIAH TEKNIK INDUSTRI DAN INOVASI · 24.07.2026 · 4 (3) · 318-329

DOI: 10.59024/jisi.v4i3.2272 ↗

Kurz gefasst

Fachartikel in der Zeitschrift JURNAL ILMIAH TEKNIK INDUSTRI DAN INOVASI, online erschienen am 24.07.2026. Verfasst von Mochammad Wildani Akbar und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to analyse the defect rate of threaded reinforcing bars, identify the dominant defects, determine Six Sigma capability, and design conceptual improvements based on Poka Yoke. The method used is Six Sigma with the DMAIC approach, combined with the Poka Yoke concept, supported by observational data, interviews, and historical data collected over a 15-day period. The results of the study indicate that the production process is not yet stable, with an average value of 3.96 Sigma and a Defects Per Million Opportunities (DPMO) of 6,831.37. A Pareto analysis identified dents (74.25 per cent) and tears (15.60 per cent) as the dominant defects. The FMEA evaluation found that the root cause with the highest priority was the absence of machine initial setup records (RPN 392) and parameter sheets (RPN 343). As a solution, it is proposed to implement Visual and Administrative Poka-Yoke measures via a One-Point Lesson (OPL) board to prevent ‘blind setup’, as well as to make the completion of check sheets mandatory. This proposal is projected to reduce the RPN for tear defects to 128 and for dent defects to 112, which will subsequently be formalised in Standard Operating Procedures (SOPs).

Zitieren

APA

Akbar, M. W., & Titisari, M. A. (2026). Analisis Perbaikan Kualitas Produk Besi Beton Ulir dengan Pendekatan DMAIC dan Poka Yoke di PT X. JURNAL ILMIAH TEKNIK INDUSTRI DAN INOVASI, 4(3), 318-329. https://doi.org/10.59024/jisi.v4i3.2272

Vancouver

Akbar MW, Titisari MA. Analisis Perbaikan Kualitas Produk Besi Beton Ulir dengan Pendekatan DMAIC dan Poka Yoke di PT X. JURNAL ILMIAH TEKNIK INDUSTRI DAN INOVASI. 2026;4(3):318-329. doi:10.59024/jisi.v4i3.2272

BibTeX
@article{Akbar2026,
  author = {Akbar, Mochammad Wildani and Titisari, Manik Ayu},
  title = {Analisis Perbaikan Kualitas Produk Besi Beton Ulir dengan Pendekatan DMAIC dan Poka Yoke di PT X},
  journal = {JURNAL ILMIAH TEKNIK INDUSTRI DAN INOVASI},
  year = {2026},
  volume = {4},
  number = {3},
  pages = {318--329},
  doi = {10.59024/jisi.v4i3.2272}
}
Kostenlos starten →