The evaluations of manufacturing pencil from waste of thermally-modified lumber
Ciência Florestal · 17.04.2026 · 36 · e91280
DOI: 10.5902/1980509891280 ↗Kurz gefasst
Fachartikel in der Zeitschrift Ciência Florestal, online erschienen am 17.04.2026. Verfasst von Hızır Volkan Görgün und 4 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study evaluated the feasibility of using thermally modified wood waste in pencil production, highlighting benefits such as dimensional stability, natural darkening, and environmental sustainability. In this context, thermally modified wood production wastes which was especially from the cut-tolength process and bigger dimensions from pencil slats were used. Production and pencil performance of four species were investigated: Scots pine (Pinus sylvestris), ash (Fraxinus spp.), ayous (Triplochiton scleroxylon) and iroko (Chlorophora excelsa). Initially, pencil production was tried with thermally modified slats on the commercial production line. Results showed that pencils could be produced from modified ash and iroko species with actual machining adjustments. Then the quality of produced pencils were tested according to national, international and company (market) standards. The pencils successfully passed the conditioning and especially the mechanical (lead break and free fall) tests, although thermal modification process generally decreases the mechanical strengths. Only insufficient results were observed on the ash pencils during the sharpening tests due its strict structure, however better results could be obtained with sharpening machines. The results generally indicated that the woods studied meet the quality requirements, with the potential to reduce costs and attract consumers interested in natural products. Because paraffin impregnation for gaining stability and darkening with chemicals will be removed in the pencil production from thermally modified woods.
Zitieren
APA
Görgün, H. V., Erkut, E., Ünsal, Ö., Candan, Z., & Yusufoğlu, Y. (2026). The evaluations of manufacturing pencil from waste of thermally-modified lumber. Ciência Florestal, 36, e91280. https://doi.org/10.5902/1980509891280
Vancouver
Görgün HV, Erkut E, Ünsal Ö, Candan Z, Yusufoğlu Y. The evaluations of manufacturing pencil from waste of thermally-modified lumber. Ciência Florestal. 2026;36:e91280. doi:10.5902/1980509891280
BibTeX
@article{Grgn2026,
author = {Görgün, Hızır Volkan and Erkut, Erman and Ünsal, Öner and Candan, Zeki and Yusufoğlu, Yusuf},
title = {The evaluations of manufacturing pencil from waste of thermally-modified lumber},
journal = {Ciência Florestal},
year = {2026},
volume = {36},
pages = {e91280},
doi = {10.5902/1980509891280}
}
EUVIMED