Surface Morphology and Anticorrosion Properties of Zinc Phosphate Coating Deposited with Various Concentrations of Zinc Oxide
Derna University Journal of Applied Sciences · 30.09.2024 · 1 (1) · 1-9
DOI: 10.58987/xecxnm05 ↗Kurz gefasst
Fachartikel in der Zeitschrift Derna University Journal of Applied Sciences, online erschienen am 30.09.2024. Verfasst von Abdulrahman Alfasi und 2 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
In this investigation, the influence of zinc oxide concentration on the microstructural evolution and corrosion resistance of zinc phosphate coating formed on mild steel was studied. Phosphate layers were deposited from phosphating bath containing different concentrations of zinc oxide (1.25 ~ 10 g/L). The surface morphology and composition of phosphate coatings were investigated via scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). Corrosion behavior of the formed coatings was evaluated using immersion test in a 3.5% NaCl solution and salt spray test in 5% NaCl. The results showed that the increase in zinc oxide content facilitated the precipitation of phosphate coating and increased its surface coverage. Immersion test results revealed that the corrosion resistance of the phosphate coatings was markedly improved as the zinc oxide concentration increased. However, the salt spray test results showed that the underfilm corrosion of phosphated-painted steel was increased as the zinc oxide content increased to high levels. The best underfilm corrosion performance was observed for the coatings obtained with phosphating bath containing 2.5 and 3.5 g/L of zinc oxide. This behavior indicates that low zinc phosphate coating serves as a good pretreatment process for subsequent organic painting finishes.
Zitieren
APA
Alfasi, A., Muhammad, W., & Abdalla, K. (2024). Surface Morphology and Anticorrosion Properties of Zinc Phosphate Coating Deposited with Various Concentrations of Zinc Oxide. Derna University Journal of Applied Sciences, 1(1), 1-9. https://doi.org/10.58987/xecxnm05
Vancouver
Alfasi A, Muhammad W, Abdalla K. Surface Morphology and Anticorrosion Properties of Zinc Phosphate Coating Deposited with Various Concentrations of Zinc Oxide. Derna University Journal of Applied Sciences. 2024;1(1):1-9. doi:10.58987/xecxnm05
BibTeX
@article{Alfasi2024,
author = {Alfasi, Abdulrahman and Muhammad, Walid and Abdalla, Khalid},
title = {Surface Morphology and Anticorrosion Properties of Zinc Phosphate Coating Deposited with Various Concentrations of Zinc Oxide},
journal = {Derna University Journal of Applied Sciences},
year = {2024},
volume = {1},
number = {1},
pages = {1--9},
doi = {10.58987/xecxnm05}
}
EUVIMED