The Elastic Properties of Objects by Determining Young's Modulus for the Characterization of Metal Raw Materials Using a Speed Sensor Encoder and a Load Cell Sensor
SAGA: Journal of Technology and Information System · 2023
DOI: 10.58905/saga.v1i2.60 ↗Kurz gefasst
Fachartikel in der Zeitschrift SAGA: Journal of Technology and Information System, 2023. Verfasst von Umi Pratiwi und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
The unique characteristic of a metal material can be determined from the value of Young's modulus which represents the ability of the material to deform in response to an external force given to the material. This study aims to determine the value of Young's modulus for three metal wires (copper, nickel, and steel) and the percentage of measurement errors using a self-designed Young's modulus kit equipped with a load cell sensor and speed sensor encoder. The measurement of Young's modulus was carried out in five experiments without any variation in diameter (the diameter was fixed and the same for all metals), and the results were compared with the reference values. The results showed that the values of Young's modulus for copper, nickel, and steel wires were 11.74 x 1010 N/m2, 21.63 x 1010 N/m2, and 20.84 x 1010 N/m2, respectively. The difference between the measured values and the reference values for Young's modulus for copper, nickel, and steel wires were 6.7%, 3.0%, and 4.18%, respectively. The small differences between the measured values and the reference values indicate that the measurement approach approximates the reference values and can be used to support other measurements involving Young's modulus values of a metal material
Zitieren
APA
Pratiwi, U., Cahyanto, W. T., & Sunardi (2023). The Elastic Properties of Objects by Determining Young's Modulus for the Characterization of Metal Raw Materials Using a Speed Sensor Encoder and a Load Cell Sensor. SAGA: Journal of Technology and Information System. https://doi.org/10.58905/saga.v1i2.60
Vancouver
Pratiwi U, Cahyanto WT, Sunardi. The Elastic Properties of Objects by Determining Young's Modulus for the Characterization of Metal Raw Materials Using a Speed Sensor Encoder and a Load Cell Sensor. SAGA: Journal of Technology and Information System. 2023. doi:10.58905/saga.v1i2.60
BibTeX
@article{Pratiwi2023,
author = {Pratiwi, Umi and Cahyanto, Wahyu Tri and Sunardi},
title = {The Elastic Properties of Objects by Determining Young's Modulus for the Characterization of Metal Raw Materials Using a Speed Sensor Encoder and a Load Cell Sensor},
journal = {SAGA: Journal of Technology and Information System},
year = {2023},
doi = {10.58905/saga.v1i2.60}
}
EUVIMED