EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Performance evaluation of ethanol-derived waste cooking oil biodiesel in a forced-draft commercial burner system

Ma. Leona Maye B. Pepito, Jasper V. Acierto, Katrina Mae S. Raiz, Lance Erroyl J. Sambaan, Alyssa Mae S. Tabasa

Innovation in Engineering · 24.02.2026 · 3 (1) · 55-68

DOI: 10.58712/ie.v3i1.44 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Innovation in Engineering, online erschienen am 24.02.2026. Verfasst von Ma. Leona Maye B. Pepito und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The improper disposal of waste cooking oil (WCO) presents significant environmental challenges, yet its potential as a renewable fuel remains underutilized. This study optimized the conversion of WCO into biodiesel through a two-step esterification and transesterification process and evaluated its performance in a commercial burner system compared to liquefied petroleum gas (LPG). The process employed acid-catalyzed esterification followed by alkaline transesterification using ethanol and potassium hydroxide, with ethanol-to-oil molar ratios of 11:1, 12:1, and 13:1. The 13:1 ratio was identified as optimal, yielding 165.85 g of crude biodiesel per 100 g of oil with reduced glycerol formation. Physicochemical characterization revealed a flash point of 160°C and a calorific value of 35.65 MJ/kg, satisfying key ASTM D6751 requirements. However, the density of 0.9756 g/mL exceeded the standard range, suggesting the presence of residual ethanol and the need for improved post-treatment purification. Performance testing showed that the biodiesel-fueled burner heated 1 L of water in 381.33 s, compared to 420.67 s for LPG, demonstrating enhanced heating performance. The system achieved a thermal efficiency of 19.46% and a specific fuel consumption of 1.48 MJ/L. Emission analysis confirmed complete combustion, with carbon monoxide levels of 22.3 ppm and zero hydrocarbon emissions. The improved performance is attributed to the use of a forced-draft burner system, which enhances fuel atomization and combustion stability. Overall, the results demonstrate that transesterified WCO is a viable and cleaner alternative to conventional fossil fuels, offering a practical waste-to-energy solution for small-scale commercial cooking applications.

Zitieren

APA

Pepito, M. L. M. B., Acierto, J. V., Raiz, K. M. S., Sambaan, L. E. J., & Tabasa, A. M. S. (2026). Performance evaluation of ethanol-derived waste cooking oil biodiesel in a forced-draft commercial burner system. Innovation in Engineering, 3(1), 55-68. https://doi.org/10.58712/ie.v3i1.44

Vancouver

Pepito MLMB, Acierto JV, Raiz KMS, Sambaan LEJ, Tabasa AMS. Performance evaluation of ethanol-derived waste cooking oil biodiesel in a forced-draft commercial burner system. Innovation in Engineering. 2026;3(1):55-68. doi:10.58712/ie.v3i1.44

BibTeX
@article{Pepito2026,
  author = {Pepito, Ma. Leona Maye B. and Acierto, Jasper V. and Raiz, Katrina Mae S. and Sambaan, Lance Erroyl J. and Tabasa, Alyssa Mae S.},
  title = {Performance evaluation of ethanol-derived waste cooking oil biodiesel in a forced-draft commercial burner system},
  journal = {Innovation in Engineering},
  year = {2026},
  volume = {3},
  number = {1},
  pages = {55--68},
  doi = {10.58712/ie.v3i1.44}
}
Kostenlos starten →