Effect of hBN on Response Times of PEO-Based Electrochromic Devices
Journal of the Turkish Chemical Society Section B: Chemical Engineering · 2024
DOI: 10.58692/jotcsb.1435022 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the Turkish Chemical Society Section B: Chemical Engineering, 2024. Verfasst von Özge Akpınar Sarıhan und 2 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben.
Abstract (Originalsprache)
In this study, all solid state electrochromic devices (ECDs) without plasticizer such as propylene carbonate were fabricated by sol-gel spin coating method. WO3 nanoparticles and PEO based polymer electrolyte solutions with hBN and without hBN nanoparticles were prepared. These solutions were sol-gel spin- and dip-coated on ITO-glass, respectively. For determining the effect of hBN nanoparticles, four configuration of ECDs were fabricated. The fast bleaching and coloring times of fabricated ECDs were obtained with hBN nanoparticles in WO3 and PEO based polymer electrolyte thin films as 1.15 seconds. Glass/ITO/hBN-WO3/hBN-PEO-based-polymer electrolyte/ITO/Glass electrochromic device is turned on and off 60 times. After 60 cycle, the device coloring time changed to 2-3 seconds, bleaching times changed to 30 seconds.
Zitieren
APA
Sarıhan, Ö. A., İnanç, İ., & Uğuz, G. (2024). Effect of hBN on Response Times of PEO-Based Electrochromic Devices. Journal of the Turkish Chemical Society Section B: Chemical Engineering. https://doi.org/10.58692/jotcsb.1435022
Vancouver
Sarıhan ÖA, İnanç İ, Uğuz G. Effect of hBN on Response Times of PEO-Based Electrochromic Devices. Journal of the Turkish Chemical Society Section B: Chemical Engineering. 2024. doi:10.58692/jotcsb.1435022
BibTeX
@article{Sarhan2024,
author = {Sarıhan, Özge Akpınar and İnanç, İbrahim and Uğuz, Gediz},
title = {Effect of hBN on Response Times of PEO-Based Electrochromic Devices},
journal = {Journal of the Turkish Chemical Society Section B: Chemical Engineering},
year = {2024},
doi = {10.58692/jotcsb.1435022}
}
EUVIMED