EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Numerical Validation of Floor Plates Due to Concentric Axial Loads Using the Steel Stress-Strain Model Approach in Abaqus Software

Septa Melani, Rosidawani Rosidawani, K.M. Aminuddin, Aurora Lutffeoneta

Journal Transnational Universal Studies · 01.04.2026 · 4 (3) · 103-115

DOI: 10.58631/jtus.v4i3.234 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal Transnational Universal Studies, online erschienen am 01.04.2026. Verfasst von Septa Melani und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to validate the numerical model of plates without openings (S1) and plates with central openings (S2) due to concentric axial loads using the ABAQUS-based Element Up Method. The model is developed with a nonlinear approach, then calibrated and verified against the results of previous research. The results of the load deflection curve calibration showed a percentage difference of 9.1% for S1 and 3.1% for S2, which is still within the tolerance limit. Comparison of the deformation distribution shows a maximum value difference of 3.2% (S1) and 1.2% (S2). There are differences in the visualization of the contour deformation that occur due to the difference in the condition of the elements and the modeling approach. The damage pattern in the S2 model shows similarities to the experimental results carried out. Overall, the numerical model developed has a good level of accuracy and validity and is suitable for advanced analysis of open plates.

Zitieren

APA

Melani, S., Rosidawani, R., Aminuddin, K., & Lutffeoneta, A. (2026). Numerical Validation of Floor Plates Due to Concentric Axial Loads Using the Steel Stress-Strain Model Approach in Abaqus Software. Journal Transnational Universal Studies, 4(3), 103-115. https://doi.org/10.58631/jtus.v4i3.234

Vancouver

Melani S, Rosidawani R, Aminuddin K, Lutffeoneta A. Numerical Validation of Floor Plates Due to Concentric Axial Loads Using the Steel Stress-Strain Model Approach in Abaqus Software. Journal Transnational Universal Studies. 2026;4(3):103-115. doi:10.58631/jtus.v4i3.234

BibTeX
@article{Melani2026,
  author = {Melani, Septa and Rosidawani, Rosidawani and Aminuddin, K.M. and Lutffeoneta, Aurora},
  title = {Numerical Validation of Floor Plates Due to Concentric Axial Loads Using the Steel Stress-Strain Model Approach in Abaqus Software},
  journal = {Journal Transnational Universal Studies},
  year = {2026},
  volume = {4},
  number = {3},
  pages = {103--115},
  doi = {10.58631/jtus.v4i3.234}
}
Kostenlos starten →