EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Ribbed Target Plate on Impingement Cooling

Roaad K. Mohammed, Shaimaa A. Naser

Babylonian Journal of Mechanical Engineering · 2023

DOI: 10.58496/bjme/2023/010 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Babylonian Journal of Mechanical Engineering, 2023. Verfasst von Roaad K. Mohammed und 1 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study experimentally investigates the heat transfer characteristics of an air jet impinging on smooth and ribbed target plates. Key variables examined include jet velocity, orifice diameter, and orifice-to-plate distance ratio (Z/D). Results show that the maximum heat transfer rate occurs at the stagnation point on the target plate. Increasing jet velocity significantly enhances heat transfer due to heightened turbulence, while larger orifice diameters yield higher heat transfer rates by covering a greater impact area. The optimal Z/D ratio for maximum heat transfer was determined to be 6 for all Reynolds numbers tested. However, introducing ribs to the target plate reduces heat transfer due to flow redirection and kinetic energy loss. These findings contribute to optimizing impingement cooling systems for various industrial applications.

Zitieren

APA

Mohammed, R. K., & Naser, S. A. (2023). Effect of Ribbed Target Plate on Impingement Cooling. Babylonian Journal of Mechanical Engineering. https://doi.org/10.58496/bjme/2023/010

Vancouver

Mohammed RK, Naser SA. Effect of Ribbed Target Plate on Impingement Cooling. Babylonian Journal of Mechanical Engineering. 2023. doi:10.58496/bjme/2023/010

BibTeX
@article{Mohammed2023,
  author = {Mohammed, Roaad K. and Naser, Shaimaa A.},
  title = {Effect of Ribbed Target Plate on Impingement Cooling},
  journal = {Babylonian Journal of Mechanical Engineering},
  year = {2023},
  doi = {10.58496/bjme/2023/010}
}
Kostenlos starten →