Design, Fabrication, and Performance Evaluation of a Recycling Machine for Converting Biodegradable Waste into Compost
Mansoura Engineering Journal · 10.07.2026 · 51 (5)
DOI: 10.58491/2735-4202.3431 ↗Kurz gefasst
Fachartikel in der Zeitschrift Mansoura Engineering Journal, online erschienen am 10.07.2026. Verfasst von Mohamed T. Eraky und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study evaluates the technical feasibility of composting shredded printed paper blended with organic waste using a manually operated aerobic composting system. The investigation focused on process performance under controlled initial conditions, particularly an optimized carbon-to-nitrogen (C:N) ratio of 30:1. Three composting piles were constructed with systematic variations in moisture content, aeration frequency, and additive composition (poultry manure, yeast, crushed eggshells, and cardboard) to assess their influence on thermal behavior and decomposition efficiency. Process performance was monitored through continuous temperature profiling and periodic observation of physical parameters, including color development and material degradation rate. Among the experimental setups, Pile 3 achieved the highest process efficiency, reaching a peak temperature of 45.5 °C and demonstrating accelerated organic matter breakdown, indicating enhanced microbial activity. In contrast, Pile 1 exhibited limited thermophilic development due to inadequate aeration, while Pile 2 showed reduced efficiency as a result of excessive moisture and substrate compaction caused by paper aggregation. The results demonstrate that printed wastepaper can serve as a viable carbon source in aerobic composting systems when key operational parameters—particularly aeration and moisture control—are properly managed. The findings provide engineering insights into process optimization for biodegradable waste valorization and support the development of efficient small-scale composting systems for organic fertilizer production.
Zitieren
APA
Eraky, M. T., Radwan, M., & Eladl, A. (2026). Design, Fabrication, and Performance Evaluation of a Recycling Machine for Converting Biodegradable Waste into Compost. Mansoura Engineering Journal, 51(5). https://doi.org/10.58491/2735-4202.3431
Vancouver
Eraky MT, Radwan M, Eladl A. Design, Fabrication, and Performance Evaluation of a Recycling Machine for Converting Biodegradable Waste into Compost. Mansoura Engineering Journal. 2026;51(5). doi:10.58491/2735-4202.3431
BibTeX
@article{Eraky2026,
author = {Eraky, Mohamed T. and Radwan, M.M and Eladl, Abdelkhalik},
title = {Design, Fabrication, and Performance Evaluation of a Recycling Machine for Converting Biodegradable Waste into Compost},
journal = {Mansoura Engineering Journal},
year = {2026},
volume = {51},
number = {5},
doi = {10.58491/2735-4202.3431}
}
EUVIMED