Experimental Study of Dimpled Serpentine Reactors for Hydrogen Production via Methanol Steam Reforming
Mansoura Engineering Journal · 16.03.2026 · 51 (2)
DOI: 10.58491/2735-4202.3402 ↗Kurz gefasst
Fachartikel in der Zeitschrift Mansoura Engineering Journal, online erschienen am 16.03.2026. Verfasst von Mohamed I. Zeid und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Hydrogen is widely regarded as a clean energy carrier, with methanol steam reforming (MSR) emerging as a promising route for portable and on-board applications due to its favorable operating conditions and high hydrogen yield. Reactor geometry plays a decisive role in hydrogen productivity, pressure drop, and energy efficiency, yet the balance among these factors remains insufficiently addressed. In this study, three serpentine aluminum microreactors: a plain serpentine reactor (PSR), a rhombusdimple reactor (RDR), and a hemispherical-dimple reactor (HDR) were fabricated and coated with a copper (II) oxide, zinc oxide, aluminum oxide (CuO/ZnO/Al₂O₃) catalyst to experimentally investigate the effect of dimple geometry on MSR performance. Experiments were conducted at 200–300 °C and feed flow rates of 2 – 30 ml/h with a steam to carbon ratio (S/C) - mixing ratio between water and methanol feed flow ratesfixed at 1.5. Results showed that the HDR consistently delivered the highest hydrogen production, reaching 300 ml/min at 300 °C and 2 ml/h, representing an increase of 79.6% over PSR and 57% over RDR, while maintaining moderate pressure drops. A performance-efficiency metric, termed specific production, revealed that PSR was advantageous at very low flow rates, whereas HDR outperformed at moderate and high flows, achieving up to 62 % higher efficiency than RDR and 28% higher than PSR. The RDR, despite moderate gains in hydrogen production, suffered from high pressure losses and remained the least efficient overall. These findings demonstrate the critical influence of channel geometry in optimizing MSR microreactors for efficient hydrogen production.
Zitieren
APA
Zeid, M. I., Shouman, M. A., Abdelrehim, O., & Hamed, A. M. (2026). Experimental Study of Dimpled Serpentine Reactors for Hydrogen Production via Methanol Steam Reforming. Mansoura Engineering Journal, 51(2). https://doi.org/10.58491/2735-4202.3402
Vancouver
Zeid MI, Shouman MA, Abdelrehim O, Hamed AM. Experimental Study of Dimpled Serpentine Reactors for Hydrogen Production via Methanol Steam Reforming. Mansoura Engineering Journal. 2026;51(2). doi:10.58491/2735-4202.3402
BibTeX
@article{Zeid2026,
author = {Zeid, Mohamed I. and Shouman, Mahmoud A. and Abdelrehim, Osama and Hamed, Ahmed M.},
title = {Experimental Study of Dimpled Serpentine Reactors for Hydrogen Production via Methanol Steam Reforming},
journal = {Mansoura Engineering Journal},
year = {2026},
volume = {51},
number = {2},
doi = {10.58491/2735-4202.3402}
}
EUVIMED