Parameter Identification of a PI Controller for a Wind Energy Conversion System Based on DFIG
Mansoura Engineering Journal · 28.12.2025 · 50 (5)
DOI: 10.58491/2735-4202.3380 ↗Kurz gefasst
Fachartikel in der Zeitschrift Mansoura Engineering Journal, online erschienen am 28.12.2025. Verfasst von Mariam Hesham und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this work, three methods are proposed to identify parameters of PI controllers used for wind energy conversion systems based on DFIG. Mathematical model of generator and grid side system is depicted. Three tuning methods; bode-plot, pole-placement, and MATLAB tuner are used for grid side and rotor side converter controllers’ design. Wind turbine system with PI controller parameters obtained using the mentioned method is investigated via MATLAB/SIMULINK under three different scenarios. The wind system is subjected to step wind speed change, random wind speed, and sever symmetrical voltage dip in the grid. The handled comparison illustrates that the pole-placement tuning method is easy to implement. Also, the PI parameters obtained using this method give less DC bus voltage overshoot and settling time. It also gives reduced ripples in rotor and grid currents and minimized torque ripples in comparison to the PI parameters obtained by the two other methods.
Zitieren
APA
Hesham, M., Osheba, D. S. M., & Khater, M. M. (2025). Parameter Identification of a PI Controller for a Wind Energy Conversion System Based on DFIG. Mansoura Engineering Journal, 50(5). https://doi.org/10.58491/2735-4202.3380
Vancouver
Hesham M, Osheba DSM, Khater MM. Parameter Identification of a PI Controller for a Wind Energy Conversion System Based on DFIG. Mansoura Engineering Journal. 2025;50(5). doi:10.58491/2735-4202.3380
BibTeX
@article{Hesham2025,
author = {Hesham, Mariam and Osheba, Dina S. M. and Khater, Mahmoud M.},
title = {Parameter Identification of a PI Controller for a Wind Energy Conversion System Based on DFIG},
journal = {Mansoura Engineering Journal},
year = {2025},
volume = {50},
number = {5},
doi = {10.58491/2735-4202.3380}
}
EUVIMED