STRENGTHENING OF R.C. BEAMS SUBJECTED TO SHEAR AND TORSION USING EXTERNALLY BONDED CFRP SHEETS
Mansoura Engineering Journal · 01.01.2025 · 50 (1)
DOI: 10.58491/2735-4202.3262 ↗Kurz gefasst
Fachartikel in der Zeitschrift Mansoura Engineering Journal, online erschienen am 01.01.2025. Verfasst von Hazem Elbakry und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The primary objective of this study was to examine the behavior of reinforced concrete beams subjected to shear and torsion and strengthened with external CFRP sheets. To achieve this, seven reinforced concrete beams with identical cross section dimensions (300 mm × 200 mm), shear span (530 mm) were fabricated and tested under combined shear and torsion. Similar flexural and shear reinforcements were used for all specimens. The experimental program included one control specimen, without CFRP sheets, and six strengthened specimens utilizing different strengthening configurations of CFRP sheets. The key variables in the study were the strengthening configuration and the width of the CFRP sheet bands. Three distinct strengthening configurations were considered: one-face bonding, C-shaped configuration, and full wrapping. The C-shaped configuration was almost as efficient as the full wrapping while the one-face bonding was considerably the least efficient arrangement.
Zitieren
APA
Elbakry, H., El-Tony, E. M., & Ali, M. M. (2025). STRENGTHENING OF R.C. BEAMS SUBJECTED TO SHEAR AND TORSION USING EXTERNALLY BONDED CFRP SHEETS. Mansoura Engineering Journal, 50(1). https://doi.org/10.58491/2735-4202.3262
Vancouver
Elbakry H, El-Tony EM, Ali MM. STRENGTHENING OF R.C. BEAMS SUBJECTED TO SHEAR AND TORSION USING EXTERNALLY BONDED CFRP SHEETS. Mansoura Engineering Journal. 2025;50(1). doi:10.58491/2735-4202.3262
BibTeX
@article{Elbakry2025,
author = {Elbakry, Hazem and El-Tony, El-Tony Mahmoud and Ali, Momen M.},
title = {STRENGTHENING OF R.C. BEAMS SUBJECTED TO SHEAR AND TORSION USING EXTERNALLY BONDED CFRP SHEETS},
journal = {Mansoura Engineering Journal},
year = {2025},
volume = {50},
number = {1},
doi = {10.58491/2735-4202.3262}
}
EUVIMED