EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of stress and strain concentrations around an elliptical hole via finite element and response surface methodology

Somaya M. Aiad, Tawakol A. Enab, Mona A. Aboueleaz

Mansoura Engineering Journal · 01.01.2023 · 49 (3)

DOI: 10.58491/2735-4202.3175 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mansoura Engineering Journal, online erschienen am 01.01.2023. Verfasst von Somaya M. Aiad und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The current investigation aims to study the stress and strain concentration factors (Kσ and Kε) around a central elliptical hole in a rectangular plate under uniaxial and biaxial loads. Finite element and response surface methods (FEM and RSM) were used to predict the values of Kσ and Kε in isotropic and orthotropic material rectangular plates. Thus, the finite element models were built using ANSYS commercial FEM software to obtain the values of Kσ and Kε for some designed cases. Moreover, the response surface methodology was applied to limit the required number of FEM runs based on the number of variables. Additionally, RSM was used to obtain the required formulas to predict the values of Kσ and Kε. The obtained formulas are accurate and closely compatible with finite element analysis (FEA) results. The obtained formulas may be used to suggest an efficient way to estimate the effect of elliptical holes on plate structures made of isotropic and orthotropic materials.

Zitieren

APA

Aiad, S. M., Enab, T. A., & Aboueleaz, M. A. (2023). Analysis of stress and strain concentrations around an elliptical hole via finite element and response surface methodology. Mansoura Engineering Journal, 49(3). https://doi.org/10.58491/2735-4202.3175

Vancouver

Aiad SM, Enab TA, Aboueleaz MA. Analysis of stress and strain concentrations around an elliptical hole via finite element and response surface methodology. Mansoura Engineering Journal. 2023;49(3). doi:10.58491/2735-4202.3175

BibTeX
@article{Aiad2023,
  author = {Aiad, Somaya M. and Enab, Tawakol A. and Aboueleaz, Mona A.},
  title = {Analysis of stress and strain concentrations around an elliptical hole via finite element and response surface methodology},
  journal = {Mansoura Engineering Journal},
  year = {2023},
  volume = {49},
  number = {3},
  doi = {10.58491/2735-4202.3175}
}
Kostenlos starten →