EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Strengthening of Mechanical Properties and Electrical Conductivity Study on 6061 Al Alloy after ECAP Process

Nour Eldeen Megahed, A.M. El-Kassas, Maher Rashad

Mansoura Engineering Journal · 06.12.2023 · 49 (1)

DOI: 10.58491/2735-4202.3123 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mansoura Engineering Journal, online erschienen am 06.12.2023. Verfasst von Nour Eldeen Megahed und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The investigation centered around the analysis of enhanced mechanical properties and electrical conductivity in an industrial aluminum alloy that underwent a transformation into an ultra-fine-grained (UFG) state. The aforementioned transformation was successfully accomplished by utilizing a singular iteration of the Equal Channel Angular Pressing (ECAP) method. The study involved conducting evaluations through hardness and compression tests, measuring electrical conductivity, and analyzing microstructures using OM and SEM. After annealing for three hours at a temperature of 4150C, it is experimentally explored how the electrical conductivity and material properties of AA-6061 The mechanical properties of the material are influenced by the level of severe plastic deformation (SPD) during the process of ECAP. The findings indicate that ECAP leads to a significant improvement in compressive strength, increasing it from 70 to 196 N/mm2 under the rate of strain of 0.008s-1 following a single pass. Additionally, the hardness of the material shows a consistent and gradual increase until reaching its peak value at 196 N/mm2. 0.008s-1, the hardness increased by 38% as a percentage. The ECAP technique has been found to significantly enhance the yield strength of AA-6061 by an impressive 180%. Additionally, the electrical conductivity of the alloy has been observed to increase from 41.5% to 45% IACS after undergoing the ECAP process. The ECAP process results in an 8.4% increase in electrical conductivity when subjected to a strain rate of 0.008s-1.

Zitieren

APA

Megahed, N. E., El-Kassas, A., & Rashad, M. (2023). Strengthening of Mechanical Properties and Electrical Conductivity Study on 6061 Al Alloy after ECAP Process. Mansoura Engineering Journal, 49(1). https://doi.org/10.58491/2735-4202.3123

Vancouver

Megahed NE, El-Kassas A, Rashad M. Strengthening of Mechanical Properties and Electrical Conductivity Study on 6061 Al Alloy after ECAP Process. Mansoura Engineering Journal. 2023;49(1). doi:10.58491/2735-4202.3123

BibTeX
@article{Megahed2023,
  author = {Megahed, Nour Eldeen and El-Kassas, A.M. and Rashad, Maher},
  title = {Strengthening of Mechanical Properties and Electrical Conductivity Study on 6061 Al Alloy after ECAP Process},
  journal = {Mansoura Engineering Journal},
  year = {2023},
  volume = {49},
  number = {1},
  doi = {10.58491/2735-4202.3123}
}
Kostenlos starten →