Wire Deflection Investigation during WEDM of AISI 304 Stainless Steel: An Experimental and Numerical Study
Mansoura Engineering Journal · 06.09.2023 · 48 (6)
DOI: 10.58491/2735-4202.3080 ↗Kurz gefasst
Fachartikel in der Zeitschrift Mansoura Engineering Journal, online erschienen am 06.09.2023. Verfasst von Sara A. El-Bahloul und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Wire electrical discharge machining (WEDM) is a specific form of electrical discharge machining that employs a small diameter wire electrode to cut a narrow kerf in the workpiece. Since the wire deflection has a negative effect on the performed cutting, this research seeks to study the resultant wire deflection during WEDM of AISI 304 stainless steel. This study is performed with the help of three types of modeling; namely, mathematical modeling, experimental modeling, and thermo-mechanical finite element modeling. The mathematical modeling is performed to analyze the stresses and the wire lag, while the experimental modeling is achieved to observe the wire deflection and the cutting forces. The thermo-mechanical finite element modeling is accomplished with the help of ABAQUS software to forecast the wire deflection and make a correlation between the experimental and computational works. The results indicate the accuracy of the proposed models. The obtained wire deflection increases at a shorter machining length then it is decreased. The wire deflection is larger in the case of cutting without working fluid compared to with working fluid. In addition, the direction of the wire deflection is in the same cutting direction in the case of without working fluid, while it is revered in the case of working fluid flow.
Zitieren
APA
El-Bahloul, S. A., & Elkhateeb, M. G. (2023). Wire Deflection Investigation during WEDM of AISI 304 Stainless Steel: An Experimental and Numerical Study. Mansoura Engineering Journal, 48(6). https://doi.org/10.58491/2735-4202.3080
Vancouver
El-Bahloul SA, Elkhateeb MG. Wire Deflection Investigation during WEDM of AISI 304 Stainless Steel: An Experimental and Numerical Study. Mansoura Engineering Journal. 2023;48(6). doi:10.58491/2735-4202.3080
BibTeX
@article{ElBahloul2023,
author = {El-Bahloul, Sara A. and Elkhateeb, Mohamed G.},
title = {Wire Deflection Investigation during WEDM of AISI 304 Stainless Steel: An Experimental and Numerical Study},
journal = {Mansoura Engineering Journal},
year = {2023},
volume = {48},
number = {6},
doi = {10.58491/2735-4202.3080}
}
EUVIMED