EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Governed Transition from 2D CAD Drawings to 3D Models: A Risk-Informed Framework for Geometric and Configuration Integrity

Abhishek Shende, Vaidehi Phase

American Journal of Technology · 15.07.2026 · 5 (8) · 38-49

DOI: 10.58425/ajt.v5i8.579 ↗

Kurz gefasst

Fachartikel in der Zeitschrift American Journal of Technology, online erschienen am 15.07.2026. Verfasst von Abhishek Shende und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aim

This paper presents a risk-based framework for transitioning from 2D CAD drawings to 3D CAD models, focusing on failure modes, their causes, and preventive actions to minimize design, manufacturing, and quality risks during the migration process.

Methods

The study identifies common failure modes encountered during the transition from 2D CAD drawings to 3D CAD models and analyzes them using a Design Failure Mode and Effects Analysis (DFMEA)-inspired methodology. Based on this analysis, the paper develops structured process control and implementation guidelines. A sample mechanical part is used to demonstrate common migration errors resulting from an unstructured transition process and the corresponding remedies required to achieve a robust 3D model suitable for production release.

Results

The analysis identifies common failure modes associated with the transition from 2D CAD drawings to 3D CAD models. It provides structured process controls to preserve design intent, minimize rework, and mitigate downstream manufacturing and warranty risks. The case example illustrates how an unstructured migration process can introduce design and production errors and demonstrates the measures required to prevent them.

Conclusion

The study concludes that the transition from 2D CAD drawings to 3D CAD models is fundamentally a process and risk management challenge rather than a tooling challenge. Effective process control is therefore essential to ensure successful migration while maintaining design intent and product quality. Recommendations: The study recommends adopting the proposed risk-based framework and structured process control guidelines when transitioning from 2D CAD drawings to 3D CAD models to reduce failure modes, preserve design intent, minimize rework, and mitigate manufacturing and warranty risks.

Zitieren

APA

Shende, A., & Phase, V. (2026). Governed Transition from 2D CAD Drawings to 3D Models: A Risk-Informed Framework for Geometric and Configuration Integrity. American Journal of Technology, 5(8), 38-49. https://doi.org/10.58425/ajt.v5i8.579

Vancouver

Shende A, Phase V. Governed Transition from 2D CAD Drawings to 3D Models: A Risk-Informed Framework for Geometric and Configuration Integrity. American Journal of Technology. 2026;5(8):38-49. doi:10.58425/ajt.v5i8.579

BibTeX
@article{Shende2026,
  author = {Shende, Abhishek and Phase, Vaidehi},
  title = {Governed Transition from 2D CAD Drawings to 3D Models: A Risk-Informed Framework for Geometric and Configuration Integrity},
  journal = {American Journal of Technology},
  year = {2026},
  volume = {5},
  number = {8},
  pages = {38--49},
  doi = {10.58425/ajt.v5i8.579}
}
Kostenlos starten →