EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

CFD-Based Aerodynamic Optimization of Vehicle-Mounted Axial Wind Turbine Blades

Rufinus Nainggolan, Husin Ibrahim, Prisca Caesa Moneteringtyas, Suadi Suadi, Baringin Sibarani, Soni Hestukoro, Abdul Razak

Jurnal Locus Penelitian dan Pengabdian · 14.08.2026 · 5 (8) · 6788-6798

DOI: 10.58344/locus.v5i8.6240 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Locus Penelitian dan Pengabdian, online erschienen am 14.08.2026. Verfasst von Rufinus Nainggolan und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing demand for sustainable energy solutions has encouraged the development of renewable energy technologies that can be integrated into various applications, including transportation systems. Wind energy generated from vehicle-induced airflow represents an alternative energy source that remains underutilized due to complex aerodynamic characteristics and unstable flow conditions. This study aimed to optimize the aerodynamic performance of vehicle-mounted axial wind turbine blades by determining the most suitable angle of attack using Computational Fluid Dynamics (CFD) simulations. The research method involved numerical analysis using CFD software to evaluate the aerodynamic behavior of turbine blades under different angle-of-attack variations of 0°, 5°, 10°, 15°, and 20°. Performance evaluation was conducted based on the lift-to-drag ratio and velocity contour distribution to identify the optimal blade configuration. The results showed that the angle of attack significantly affected aerodynamic performance, with the 10° configuration producing the highest lift-to-drag ratio and the most favorable airflow characteristics. Higher angles of attack resulted in increased flow separation and aerodynamic losses, whereas lower angles produced insufficient lift generation. The optimized turbine design consisted of six blades with a rotor diameter of 0.35 m, demonstrating the potential application of vehicle-induced airflow energy harvesting systems. In conclusion, CFD-based optimization provided an effective approach for improving the performance of vehicle-mounted wind turbine blades and supported future development of renewable energy technologies for sustainable transportation applications.

Zitieren

APA

Nainggolan, R., Ibrahim, H., Moneteringtyas, P. C., Suadi, S., Sibarani, B., Hestukoro, S., & Razak, A. (2026). CFD-Based Aerodynamic Optimization of Vehicle-Mounted Axial Wind Turbine Blades. Jurnal Locus Penelitian dan Pengabdian, 5(8), 6788-6798. https://doi.org/10.58344/locus.v5i8.6240

Vancouver

Nainggolan R, Ibrahim H, Moneteringtyas PC, Suadi S, Sibarani B, Hestukoro S, et al. CFD-Based Aerodynamic Optimization of Vehicle-Mounted Axial Wind Turbine Blades. Jurnal Locus Penelitian dan Pengabdian. 2026;5(8):6788-6798. doi:10.58344/locus.v5i8.6240

BibTeX
@article{Nainggolan2026,
  author = {Nainggolan, Rufinus and Ibrahim, Husin and Moneteringtyas, Prisca Caesa and Suadi, Suadi and Sibarani, Baringin and Hestukoro, Soni and Razak, Abdul},
  title = {CFD-Based Aerodynamic Optimization of Vehicle-Mounted Axial Wind Turbine Blades},
  journal = {Jurnal Locus Penelitian dan Pengabdian},
  year = {2026},
  volume = {5},
  number = {8},
  pages = {6788--6798},
  doi = {10.58344/locus.v5i8.6240}
}
Kostenlos starten →