EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Automation of Forks-Conveyor System using Integrated Photodiode Sensor

Ricky Sinaga, Lanny W. Pandjaitan, Lukas Lukas

International Journal of Engineering Continuity · 23.10.2025 · 4 (2) · 23-39

DOI: 10.58291/ijec.v4i2.427 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Engineering Continuity, online erschienen am 23.10.2025. Verfasst von Ricky Sinaga und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Desynchronization between incoming containers and lifting forks prior to the starwheel is a common source of misalignment, container drops, and excessive mechanical load in 19-L bottled water filling lines. This study proposes a low-cost retrofit system that integrates a photodiode sensor with timer–relay logic to regulate start–stop motor control based on the real-time fork position. The system was implemented upstream of the filling station and evaluated during a three-week trial in an operating commercial facility. Results showed that the intervention reduced average starwheel load from 7.54 kg to 2.30 kg and decreased container-fall incidents by approximately 50%. In addition, the modification eliminated the need for one operator per shift, corresponding to annual labor savings of more than IDR 150 million and a payback period of less than one month. These findings demonstrate that photodiode-based synchronization can provide an industry-validated, cost-effective retrofit solution for packaging operations without the requirement for PLC reprogramming or major structural modification. Future work will address long-term durability, adaptability to different container geometries, and the potential integration of feedback and monitoring functions.

Zitieren

APA

Sinaga, R., Pandjaitan, L. W., & Lukas, L. (2025). Automation of Forks-Conveyor System using Integrated Photodiode Sensor. International Journal of Engineering Continuity, 4(2), 23-39. https://doi.org/10.58291/ijec.v4i2.427

Vancouver

Sinaga R, Pandjaitan LW, Lukas L. Automation of Forks-Conveyor System using Integrated Photodiode Sensor. International Journal of Engineering Continuity. 2025;4(2):23-39. doi:10.58291/ijec.v4i2.427

BibTeX
@article{Sinaga2025,
  author = {Sinaga, Ricky and Pandjaitan, Lanny W. and Lukas, Lukas},
  title = {Automation of Forks-Conveyor System using Integrated Photodiode Sensor},
  journal = {International Journal of Engineering Continuity},
  year = {2025},
  volume = {4},
  number = {2},
  pages = {23--39},
  doi = {10.58291/ijec.v4i2.427}
}
Kostenlos starten →