EUVIMEDEUVIMED entdecken
Crossref

Acoustic Emission-Based Early Warning of Thermal Runaway in Lithium-Ion Batteries

Wuke Xu, Fan Shi

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/34074 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Wuke Xu und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing adoption of lithium-ion batteries (LIBs) in electric vehicles, energy storage systems, and marine applications has amplified the demand for advanced health monitoring technologies that ensure operational safety and reliability. Among the various failure modes of LIBs, thermal runaway (TR) poses the most severe safety hazard, as it involves uncontrollable exothermic reactions that can lead to fire or explosion. Current monitoring systems based on voltage, temperature, or gas venting typically provide warning only after irreversible internal degradation has occurred, offering limited time for intervention. To address this challenge, this study presents an acoustic emission (AE)-based early warning system capable of detecting the onset of thermal runaway at its initial stage, well before conventional indicators become evident. The proposed system employs piezoelectric AE sensors coupled to the battery casing to capture transient acoustic signals generated by early-stage internal phenomena such as micro-cracking, electrode deformation, separator failure, and gas evolution. The signals are acquired through a high-speed data acquisition unit equipped with preamplification and band-pass filtering. Real-time data processing includes noise filtering, event detection, and feature extraction across time, frequency, and statistical domains. A threshold is set based on baseline noise characterization to ensure robust event identification. Experiments were performed on NCM prismatic cells and modules under controlled thermal abuse conditions. A heating plate was used to induce localized heating and trigger TR, while thermocouples monitored temperature changes across the cell surfaces. In the single-cell tests, AE activity was observed approximately 210 seconds after heating began, when the cell temperature was still near 40 °C, far below the onset of venting or visible deformation. As heating continued, AE events increased in both amplitude and frequency, signaling intensified internal reactions. The activation of the safety valve, indicating gas venting, occurred roughly three minutes later, confirming that AE monitoring provides a significant early-warning window. In the module-level experiments, one AE sensor was installed on the surface of one cell while the other cell was heated. Remarkably, the system detected precursor AE signals from both cells, demonstrating effective coverage of multi-cell structures with very few sensors. This highlights the scalability and cost-efficiency of the method for large-format battery packs. The results confirm that AE sensing can serve as a sensitive, non-invasive, and scalable approach for early-stage detection of thermal instability in lithium-ion batteries. Compared with temperature or voltage monitoring, AE provides earlier and more direct insight into internal degradation mechanisms. This work extends the application of structural health monitoring (SHM) concepts to the field of battery safety, offering a new direction for integrating acoustic sensing and intelligent diagnostics into next-generation Battery Management Systems (BMS).

Zitieren

APA

Xu, W., & Shi, F. (2026). Acoustic Emission-Based Early Warning of Thermal Runaway in Lithium-Ion Batteries. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/34074

Vancouver

Xu W, Shi F. Acoustic Emission-Based Early Warning of Thermal Runaway in Lithium-Ion Batteries. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/34074

BibTeX
@article{Xu2026,
  author = {Xu, Wuke and Shi, Fan},
  title = {Acoustic Emission-Based Early Warning of Thermal Runaway in Lithium-Ion Batteries},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/34074}
}
Kostenlos starten →