EUVIMEDEUVIMED entdecken
Crossref

In‑situ acousto‑ultrasonic monitoring of Type IV hydrogen pressure vessels using surface‑embedded piezoelectric networks

Kilian Tschöke, Georg Lautenschläger, Carsten Kruska, Tobias Gaul, Thomas Klesse, Robert Schwerz, Lars Schubert, Mike Röllig

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/34062 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Kilian Tschöke und 7 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrogen, as an energy carrier, is finding its way into more and more areas of application, such as on-board tanks for passenger cars, trucks and buses, high-pressure buffer storage at refueling stations, stationary and backup power systems, emerging rail/ship/offshore demonstrators, and industrial/laboratory gas supplies. Safe, available, and cost‑effective hydrogen storage demands monitoring solutions that operate continuously without disrupting service. We present an application‑driven Acousto‑Ultrasonic (AU) concept for Type IV pressure vessels that integrates a dense network of piezoelectric transducers into the outer composite structure via a low‑temperature secondary lamination process. The approach targets guided‑wave interrogation across the cylindrical wall to detect and localize damage relevant to hydrogen service while fitting existing manufacturing and maintenance workflows. A 9 L, 300 bar Type IV vessel (PET liner, carbon fiber overwrap) serves as the demonstrator. The sensing network comprises three circumferential rings of piezoelectric transducers with triangular spacing (typically 3–4 nodes per ring). Signal routing is realized on a thin, conformal multilayer flex PCB that is co‑bonded to the tank and fully encapsulated under glass‑fiber/epoxy cover plies, yielding a total buildup below ~1.5 mm and preserving aerodynamic and handling requirements. The piezoelectric sensors themselves are soldered to the PCB, ensuring a reliable connection. A single external interface—implemented as a low‑profile, keyed, magnetically latched pogo‑pin connector—enables rapid, tool‑less attachment of AU instrumentation while maintaining a sealed, snag‑resistant surface during operation. Process development focused on field viability: vacuum‑assisted hot‑bonding below 90°C avoids thermal over‑exposure of the polymer liner; surface preparation and layup sequences were optimized to minimize voids and ensure adhesion on curved substrates. Trials on representative coupons, metal cylinders, and composite tanks confirmed reliable conformity of 200–350 µm interconnects, robust anchoring of local steel backings for the removable connector, and repeatable lamination with minimal porosity when surfaces are abraded and vacuum levels ~130 mbar are maintained. The measurement concept uses a pitch–catch scheme—one actuator, all others as receivers—with comprehensive shielding and a star‑routed ground to enhance signal integrity over longer runs and reduce the number of required bulkhead connections. The primary impact of this work is twofold. First, it demonstrates a retrofit‑compatible path to deploy guided‑wave SHM on certified vessels without altering the original winding or requiring autoclave processes. Second, it provides a manufacturable blueprint—sensor placement rules, interconnect architecture, connectorization, and a validated lamination window—that scales to larger vessels and higher sensor densities. Ongoing testing includes AU baseline stability under pressure/temperature, defect detectability in the hoop regions, and durability. The results support condition‑based maintenance of hydrogen vessels, enabling reduced inspection downtime, expanded coverage of otherwise inaccessible regions, and improved fleet safety at manageable integration cost.

Zitieren

APA

Tschöke, K., Lautenschläger, G., Kruska, C., Gaul, T., Klesse, T., Schwerz, R., Schubert, L., & Röllig, M. (2026). In‑situ acousto‑ultrasonic monitoring of Type IV hydrogen pressure vessels using surface‑embedded piezoelectric networks. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/34062

Vancouver

Tschöke K, Lautenschläger G, Kruska C, Gaul T, Klesse T, Schwerz R, et al. In‑situ acousto‑ultrasonic monitoring of Type IV hydrogen pressure vessels using surface‑embedded piezoelectric networks. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/34062

BibTeX
@article{Tschke2026,
  author = {Tschöke, Kilian and Lautenschläger, Georg and Kruska, Carsten and Gaul, Tobias and Klesse, Thomas and Schwerz, Robert and Schubert, Lars and Röllig, Mike},
  title = {In‑situ acousto‑ultrasonic monitoring of Type IV hydrogen pressure vessels using surface‑embedded piezoelectric networks},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/34062}
}
Kostenlos starten →