Embedded Artificial Intelligence enhanced guided-waves based SHM system for defects detection
e-Journal of Nondestructive Testing · 2026-08 · 31 (8)
DOI: 10.58286/34028 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Robin Guyon und 2 weiteren Autor:innen.
Abstract (Originalsprache)
In the context of Structural Health Monitoring (SHM) based on ultrasonic guided waves, one of the major challenges lies in the strong sensitivity of signals to environmental and operational variations, particularly temperature changes. These fluctuations can induce significant distortions, leading to false alarms if not properly compensated. In addition, embedded sensors generate large volumes of data, while high-speed connectivity (e.g. Wifi, 4G, 5G) is not always available or may be costly, thereby requiring local processing. As a result, an SHM system intended for real-world deployment must be capable of performing on-board data analysis while accounting for physical constraints, such as environmental and operational conditions. In this context, the CEA-List has been working over the past years on the development of a complete SHM processing chain, ranging from the hardware design of guided-wave acquisition system to advanced data processing and analysis methods. In this work, we present a fully embedded solution based on the Geronimo platform, integrating signal acquisition, environmental effect compensation, imaging techniques and decision-making algorithms to convert complex ultrasonic measurements into reliable alerts. Artificial intelligence is implemented at two key stages: first, an autoencoder-based model is used to address the limitations of conventional emperature compensation methods. Second, as the selected imaging technique remains qualitative, a convolutional neural network is used to estimate the position and the size of defects. Preliminary laboratory experiments have been conducted independently for each stage of the processing chain. The autoencoder-based compensation model was evaluated on several experimental datasets, showing excellent performances compared to conventional approaches. A classic imaging method, namely delay and sum, has been successfully deployed on the Geronimo platform, achieving a computation speed compatible with real-time acquisition. Then, analysis models trained on simulation data generated by the CIVA software and adapted to the real conditons via transfer learning on experimental datasets were implemented on system, enabling accurate defect characterization. Finally, all processing stages were fully integrated and combined within the Geronimo platform to evaluate the performance of the complete SHM chain under laboratory conditions.
Zitieren
APA
Guyon, R., Newson, M., & Fisher, C. (2026). Embedded Artificial Intelligence enhanced guided-waves based SHM system for defects detection. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/34028
Vancouver
Guyon R, Newson M, Fisher C. Embedded Artificial Intelligence enhanced guided-waves based SHM system for defects detection. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/34028
BibTeX
@article{Guyon2026,
author = {Guyon, Robin and Newson, Matthew and Fisher, Clément},
title = {Embedded Artificial Intelligence enhanced guided-waves based SHM system for defects detection},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {8},
doi = {10.58286/34028}
}
EUVIMED