Characterization of wave generation in concrete using embedded PZT transducers under dynamic excitation
e-Journal of Nondestructive Testing · 2026-08 · 31 (8)
DOI: 10.58286/34022 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Anna Maria Skłodowska und 4 weiteren Autor:innen.
Abstract (Originalsprache)
Piezoelectric (PZT) transducers are widely used in structural health monitoring (SHM) and nondestructive evaluation (NDE) for ultrasonic wave generation and sensing. However, their electromechanical coupling, especially when embedded in concrete, is often assumed ideal, with little attention to how the input electrical waveform translates into mechanical output. This assumption can lead to misinterpretation of advanced ultrasonic techniques, such as Coda Wave Interferometry, if source distortions are not accounted for. In this study, we experimentally characterize wave generation in free and embedded PZT transducers, focusing on the effects of excitation waveform, input voltage, and boundary conditions. The drive voltage of the PZT transducer is monitored via an oscilloscope, and surface displacement is measured using a laser Doppler vibrometer (LDV). Tests included harmonic sine waves, Gaussian-modulated signals, chirps, and broadband pulses across varying voltages and frequencies, applied to transducers in air and embedded in concrete. Our results reveal that the applied electrical input and mechanical output deviate from the nominal input signal in both configurations, but with distinct patterns. Increasing voltage consistently introduces waveform distortion and spectral redistribution. In the air, these changes are irregular and less predictable, with variable harmonic content and transient behavior. When embedded in concrete, distortions follow a more systematic trend: dominant frequency downshifts, selective emergence or suppression of spectral peaks, and altered damping linked to boundary conditions (sensor boundary) and impedance changes. Oscilloscope and impedance measurements confirm that transducer–host interaction significantly modifies the electromechanical transfer function, introducing amplitude-dependent nonlinearities that cannot be inferred from the generator signal alone. These findings underscore the need to explicitly characterize embedded transducer behavior before interpreting ultrasonic wavefields in SHM and NDE. Ignoring source distortions risks conflating material changes with transducer-induced effects. By combining electrical and optical measurements, the proposed methodology offers a framework for understanding wave generation in concrete and highlights that the output of embedded PZT depends strongly on excitation parameters and host conditions. Future work will extend this approach to different transducer geometries and concrete compositions to develop practical guidelines for experiment design and data interpretation.
Zitieren
APA
Skłodowska, A. M., Kocherla, A., subia, H. A. C., Solodov, D., & Niederleithinger, E. (2026). Characterization of wave generation in concrete using embedded PZT transducers under dynamic excitation. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/34022
Vancouver
Skłodowska AM, Kocherla A, subia HAC, Solodov D, Niederleithinger E. Characterization of wave generation in concrete using embedded PZT transducers under dynamic excitation. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/34022
BibTeX
@article{Skodowska2026,
author = {Skłodowska, Anna Maria and Kocherla, Amarteja and subia, Hernan Alejandro Coronel and Solodov, Dmitry and Niederleithinger, Ernst},
title = {Characterization of wave generation in concrete using embedded PZT transducers under dynamic excitation},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {8},
doi = {10.58286/34022}
}
EUVIMED