EUVIMEDEUVIMED entdecken
Crossref

DFOS-Based Monitoring of a Composite Railway Bridge with Embedded Fibres

Stefan Lachinger, Petr Dohnalik, Alois Vorwagner

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/34003 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Stefan Lachinger und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In Austria, a new railway bridge with a composite design has been constructed in an area characterized by complex geological conditions. To obtain detailed insights into the bridge’s structural behaviour from the initial state on, an integrated monitoring concept based on distributed fibre optic sensing (DFOS) was implemented during the construction process. The bridge features a steel truss superstructure combined with a reinforced concrete deck. Fibre optic sensors were embedded directly within the composite joint, in the concrete slab, and along the steel framework to enable spatially continuous, high-resolution measurements of strain and temperature throughout the construction phase and ongoing operation. The initial measurements covered key stages starting from concreting to proof load testing. Subsequent periodic measurements are planned to capture long-term changes in the internal strain state of the bridge, including longtime effects of the structure and surroundings. The chosen monitoring approach enables spatially continuous detection of both strain and temperature in the different bridge components. To ensure reliable strain evaluation, a temperature compensation model was developed through laboratory calibration using climate chamber tests on representative steel and concrete specimens with embedded fibres. These tests facilitated the derivation of material-specific temperature–strain relationships and allowed for the separation of thermally and mechanically induced strain components in the field data. The resulting compensation model is applied to the distributed measurements, ensuring accurate assessment of structural strain under varying environmental conditions. This paper presents the overall concept and exemplary results obtained during the construction phase, demonstrating the feasibility and performance of the monitoring system under real-world conditions. The recorded data provide valuable insights into the evolution of the structural response during key construction stages, including concreting, composite activation when removing the auxiliary supports and proof load tests just before starting the operation. Initial findings show a clear correlation between measured strain patterns and construction activities, validating both the sensor placement and the overall measurement concept. The presented results represent an important step toward the practical application of distributed fibre optic sensing in large-scale composite bridge structures under complex site conditions. The insights gained will serve as a foundation for further evaluation during the operational phase, supporting continuous structural health monitoring, early detection of potential damage, and an improved understanding of the long-term behaviour of steel–concrete composite systems.

Zitieren

APA

Lachinger, S., Dohnalik, P., & Vorwagner, A. (2026). DFOS-Based Monitoring of a Composite Railway Bridge with Embedded Fibres. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/34003

Vancouver

Lachinger S, Dohnalik P, Vorwagner A. DFOS-Based Monitoring of a Composite Railway Bridge with Embedded Fibres. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/34003

BibTeX
@article{Lachinger2026,
  author = {Lachinger, Stefan and Dohnalik, Petr and Vorwagner, Alois},
  title = {DFOS-Based Monitoring of a Composite Railway Bridge with Embedded Fibres},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/34003}
}
Kostenlos starten →