Structural health monitoring of prestressed concrete railway sleepers using acoustic emission testing during static bending tests
e-Journal of Nondestructive Testing · 2026-08 · 31 (8)
DOI: 10.58286/34000 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Gerd Manthei und 5 weiteren Autor:innen.
Abstract (Originalsprache)
This study experimentally and numerically investigates the structural behavior of prestressed concrete sleepers made of high-performance concrete. Particular attention is given to the formation of bending cracks and the associated deformation behavior. The objective is to analyze the structural response under bending stresses in the midspan and support regions and to validate the numerical model using experimental results. An experimental program was developed in accordance with relevant standards to examine the bending crack formation and deformation behavior, supported by additional specimens for determining the material properties of the concrete and prestressing steel. Acoustic emission (AE) monitoring was employed to observe fracture processes in real time. To detect microcracking during loading broadband AE sensors with a measurement frequency of up to 200 kHz were used which were especially developed for the detection of microcracks in concrete. For automatic three-dimensional location of the AE sources, a network with 16 of these AE sensors were attached to the surface of the specimen. The AE activity started at approximately 43 kN. At this load the crack formation begins normatively uncritical, but with an influence on durability. Most of the located AE events (approximately 19.000) identifying a vertical macroscopic crack plane in the midspan region where the load was applied. Additional vertical side cracks developed symmetrically parallel to the main crack plane. Based on experimental investigations with evaluation of the results from digital image correlation and the determination of material parameters, nonlinear finite element calculations were modeled and validated. These calculations were then used in a parametric study investigating the influence of reinforcement layout and bar diameter on the initiation of cracking. The results indicate that bending stiffness in both cracked and uncracked states can be enhanced, and that the onset of cracking can be delayed. However, due to the limited number of test specimens, the findings should be regarded as conditionally valid.
Zitieren
APA
Manthei, G., Asmussen, M. E., Koob, M., Hoß, L., Minnert, J., & Lademann, F. (2026). Structural health monitoring of prestressed concrete railway sleepers using acoustic emission testing during static bending tests. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/34000
Vancouver
Manthei G, Asmussen ME, Koob M, Hoß L, Minnert J, Lademann F. Structural health monitoring of prestressed concrete railway sleepers using acoustic emission testing during static bending tests. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/34000
BibTeX
@article{Manthei2026,
author = {Manthei, Gerd and Asmussen, Maxime Elias and Koob, Manuel and Hoß, Leon and Minnert, Jens and Lademann, Frank},
title = {Structural health monitoring of prestressed concrete railway sleepers using acoustic emission testing during static bending tests},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {8},
doi = {10.58286/34000}
}
EUVIMED