EUVIMEDEUVIMED entdecken
Crossref

Quantifying and visualizing Tube Bulges Behind the Tube Sheet with Eddy Current Array Technology

David Mapp

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33977 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von David Mapp.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tube over-expansion during the fabrication of shell-and-tube heat exchangers can result in localized bulging immediately behind the tube sheet, introducing residual stresses and geometric discontinuities not detectable by visual inspection once the exchanger is assembled. This paper presents an experimental assessment using the Eddyfi Ectane E128RMNI with the DefHi BCA 15.6 mm LF probe to detect and quantify these back-bulges in Titanium Grade 2H tubes (OD 19.05 mm, WT 1.25 mm, tube sheet 185 mm thick). The Magnifi analysis software was configured with an exhaustive landmark set, positional alarm gates, and a multi-channel C-scan layout to enable consistent automated detection. Bulge dimensions measured by internal mechanical gauge were correlated with high frequency differential (D1) bobbin channel amplitudes, yielding a linear calibration relationship (y = 0.0312x + 16.432, R² = 0.8996) from which a practical amplitude-based sizing scale was derived. Array channel C-scans provided spatial visual confirmation. Results support improved fabrication quality control and more informed decisions by the asset owner as a result of the discovery of the back-bulge condition during the heat exchanger manufacturing process.

Zitieren

APA

Mapp, D. (2026). Quantifying and visualizing Tube Bulges Behind the Tube Sheet with Eddy Current Array Technology. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33977

Vancouver

Mapp D. Quantifying and visualizing Tube Bulges Behind the Tube Sheet with Eddy Current Array Technology. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33977

BibTeX
@article{Mapp2026,
  author = {Mapp, David},
  title = {Quantifying and visualizing Tube Bulges Behind the Tube Sheet with Eddy Current Array Technology},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33977}
}
Kostenlos starten →